Deepwater Riser Engineering Training Course

Name: Deepwater Riser Engineering Fundamentals Training Course
Availability: InStock

Create a first riser design basis and screen configurations, load cases, dynamic response, fatigue, and interference.

Deepwater Riser Engineering Training Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Cape town, Cairo, London, Jakarta, Doha, Lagos and more
Next session: 8 – 12 November 2026, Cape town
Average fee: 7,500 €

Home
Our Categories
Deepwater Riser Engineering Fundamentals Training Course

Overview

Deepwater Riser Engineering Fundamentals Training Course is a one-week foundation course for early-career offshore, subsea, drilling, production, structural, and project engineers who leave with a Deepwater Riser Basis and Screening Workbook. Participants connect deepwater riser system selection, riser static configuration analysis, riser load case screening, vortex-induced vibration and fatigue, and riser interference assessment with interfaces, materials, vessel motions, metocean inputs, and assurance. Agile Leaders Training Center presents foundation engineering for deepwater riser systems.

Who Should Attend

Offshore engineering functions responsible for floating-facility and riser design interfaces
Subsea engineering functions responsible for riser architecture, components, and seabed connections
Drilling and production engineering functions responsible for functional requirements and load cases
Naval architecture and structural functions responsible for vessel motions, configuration, and response
Project and assurance functions responsible for design-basis records, reviews, and technical decisions

The course assumes participants can read engineering drawings and basic mechanics calculations, and it leaves out detailed finite-element modeling, software operation, fabrication qualification, offshore installation execution, and integrity-management planning.

Departments and Industries

The course supports departments and industries that select, design, review, or procure offshore riser systems.

Offshore oil and gas drilling and production projects
Subsea engineering, floating systems, and marine construction
Offshore carbon storage and injection developments
Engineering contractors, equipment suppliers, and technical consultancies
Classification, verification, project assurance, and applied research functions

Learning Objectives

By the end of this course, participants will be able to:

Compare drilling and production riser concepts
Build functional, interface, and design-input registers
Apply static configuration and load-case screening methods
Analyze pressure, environmental, motion, and soil effects
Evaluate vibration, fatigue, and interference risks
Prioritize design checks and assurance evidence

Course Agenda

Day 1: Define the Riser System

Drilling and Production Riser Concept Selection Matrix
Functional Requirement and Performance-Criterion Register
Topside, Vessel, Subsea, and Well Interface Map
Riser Component and Load-Path Schematic
DNV-ST-F201 Design-Basis Structure Review

Day 2: Establish Design Inputs

Water-Depth, Bathymetry, and Seabed Data Sheet
Wave, Current, and Metocean Design-Condition Matrix
Floater Motion and Riser Hang-Off Input Table
Material, Corrosion Allowance, and Component Property Register
API Spec 16F Marine Drilling Riser Component Map

Day 3: Screen Configuration and Strength

Catenary, Tensioned, and Flexible Configuration Comparison
Top-Tension, Hang-Off, and Touchdown-Zone Screening Sheet
Internal and External Pressure Load Combination Table
Burst, Collapse, and Combined-Loading Check Map
Installation, Operating, and Accidental Load-Case Register

Day 4: Evaluate Dynamic Response

Vessel Motion and Environmental Response Pathway
Vortex-Induced Vibration Screening Method
Wave-Frequency and Fatigue Damage Assessment Sheet
DNV-RP-F203 Riser Interference Assessment Map
Dynamic Uncertainty and Analysis-Refinement Decision Log

Day 5: Practice Riser Design Screening

Suggested Exercise: Select a Riser Concept and Interfaces
Suggested Exercise: Assemble Metocean and Motion Inputs
Suggested Exercise: Screen Configuration and Combined Loads
Suggested Exercise: Rank Vibration, Fatigue, and Interference Risks
Capstone Exercise: Complete the Deepwater Riser Basis and Screening Workbook

Practical Exercises

The course uses suggested activities to turn project requirements and environmental data into traceable riser-design decisions.

Suggested activity: compare drilling, rigid production, flexible, and tensioned riser concepts against functional and interface requirements.
Suggested activity: organize water-depth, metocean, vessel-motion, material, pressure, and seabed inputs with uncertainty notes.
Suggested activity: screen top tension, touchdown behavior, pressure loads, collapse, burst, vibration, fatigue, and interference.
Suggested activity: identify checks that require refined analysis and document the assurance evidence needed.

FAQs

Who suits deepwater riser engineering fundamentals training, and what does it assume?

Deepwater riser engineering fundamentals training suits early-career offshore, subsea, drilling, production, structural, naval-architecture, and project functions. It assumes participants can read engineering drawings and basic mechanics calculations.

How does deepwater riser design differ from riser integrity management?

Deepwater riser design establishes requirements, configurations, loads, structural checks, and design evidence before service. Riser integrity management controls degradation, inspection, anomalies, repairs, and lifecycle assurance after design and installation.

What inputs control deepwater riser static configuration?

Static configuration depends on water depth, riser type, weight and buoyancy, top tension or hang-off, internal contents, seabed contact, offsets, current, temperature, pressure, and interface geometry.

Why are vortex-induced vibration and fatigue screened in riser engineering?

Vortex-induced vibration and cyclic environmental response can accumulate fatigue damage at joints, hang-off regions, stress concentrations, and touchdown zones. Screening identifies where refined dynamic analysis is required.

How is riser interference assessed in deepwater developments?

Riser interference is assessed through layout, offsets, current profiles, dynamic envelopes, wake effects, relative motion, clearance criteria, uncertainty, and operating or accidental cases.

Conclusion

Participants take back a Deepwater Riser Basis and Screening Workbook containing requirements, interfaces, inputs, configurations, load cases, structural screens, dynamic risks, and assurance actions. The workbook changes scattered project data into a traceable first design review. It supports concept selection, analysis planning, technical review, procurement interfaces, and decisions about refined engineering.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 21-40 of 58 events

Location	Dates	Duration	Mode	Price
Trabzon	Week 10, 2027 14 – 18 March 2027	1 Week	Onsite	€8,000
Chicago	Week 11, 2027 21 – 25 March 2027	1 Week	Onsite	€16,000
Berlin	Week 13, 2027 29 March – 2 April 2027	1 Week	Onsite	€6,500
Tokyo	Week 14, 2027 5 – 9 April 2027	1 Week	Onsite	€12,000
Phuket	Week 14, 2027 11 – 15 April 2027	1 Week	Onsite	€8,000
Prague	Week 16, 2027 19 – 23 April 2027	1 Week	Onsite	€7,500
Amsterdam	Week 17, 2027 26 – 30 April 2027	1 Week	Onsite	€6,500
Dubai	Week 18, 2027 3 – 7 May 2027	1 Week	Onsite	€6,500
Paris	Week 18, 2027 3 – 7 May 2027	1 Week	Onsite	€6,500
London	Week 19, 2027 10 – 14 May 2027	1 Week	Onsite	€6,500
Sharm El-Sheikh	Week 20, 2027 17 – 21 May 2027	1 Week	Onsite	€5,200
Athens	Week 21, 2027 24 – 28 May 2027	1 Week	Onsite	€7,500
Seoul	Week 22, 2027 31 May – 4 June 2027	1 Week	Onsite	€12,000
Nairobi	Week 22, 2027 6 – 10 June 2027	1 Week	Onsite	€6,000
Zoom	Week 24, 2027 14 – 18 June 2027	1 Week	Online	€3,000
Bangkok	Week 24, 2027 20 – 24 June 2027	1 Week	Onsite	€8,000
Baku	Week 26, 2027 28 June – 2 July 2027	1 Week	Onsite	€8,000
Accra	Week 26, 2027 4 – 8 July 2027	1 Week	Onsite	€6,000
Abu Dhabi	Week 28, 2027 12 – 16 July 2027	1 Week	Onsite	€6,500
Madrid	Week 29, 2027 19 – 23 July 2027	1 Week	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewDeepwater Riser Engineering Fundamentals Training Course is a one-week foundation course for early-career offshore, subsea, drilling, production, structural, and project engineers who leave with a Deepwater Riser Basis and Screening Workbook. Participants connect deepwater riser system selection, riser static configuration analysis, riser load cas…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Deepwater Riser Engineering Training Course