Rig Movement and Safety Procedures Training Course

Name: Advanced Rig Movement and Safety Procedures Training Course
Availability: InStock

Field controls for teams planning routes, loads, lifting, convoys, rig positioning, contractor interfaces, and emergency readiness.

At a glance

Duration: 1 Week
Format: Classroom
Cities: Dubai, Phuket, San Diego, Casablanca, Trabzon, Munich and more
Next session: 2 – 6 November 2026, Dubai
Average fee: 7,500 €

Home
Our Categories
Advanced Rig Movement and Safety Procedures Training Course

Download Brochure (PDF) Print PDF

Overview

Advanced Rig Movement and Safety Procedures Training Course is a one-week advanced course for drilling supervisors, rig movers, transport coordinators, HSE professionals, lifting teams, logistics planners, and contractor representatives who leave with an Integrated Rig Move Plan. Participants connect route and site readiness, loads, lifting, convoy movement, clearances, simultaneous operations, contractor interfaces, emergency arrangements, permits, and verification to one controlled sequence. Agile Leaders Training Center presents rig movement safety through coordinated field decisions.

Who Should Attend

Functions responsible for drilling-rig mobilization and operational readiness
Teams that plan heavy transport, routes, escorts, and convoy movement
Functions responsible for lifting, load restraint, and equipment positioning
HSE teams that lead hazard assessment, permits, and field verification
Contractor interfaces responsible for coordinated rig-down and rig-up work
Supervisors responsible for simultaneous operations and stop-work decisions

The course assumes participants already support drilling, heavy transport, lifting, logistics, or field safety activities and leaves out public-road licensing, detailed equipment engineering, and jurisdiction-specific legal advice.

Departments and Industries

The course serves departments and industries that move, position, assemble, or support heavy drilling equipment.

Onshore drilling and well-servicing operations
Energy-field logistics and heavy-haul transport
Lifting, crane, and load-handling functions
Maintenance, engineering, and site-readiness teams
HSE, emergency, security, and operational-assurance functions
Drilling contractors, transport contractors, and equipment suppliers

Learning Objectives

By the end of this course, participants will be able to:

Analyze route, site, utility, clearance, and weather constraints
Build load, lifting, convoy, and positioning controls
Apply task hazard analysis and permit decisions
Evaluate contractor interfaces and simultaneous operations
Diagnose deviations and activate stop-work or emergency actions
Build an Integrated Rig Move Plan

Course Agenda

Day 1: Move Scope and Readiness Decisions

Rig Move Type and Scope Definition Sheet
Move Organization and Responsibility Matrix
Route Survey and Access Constraint Register
Destination Site Readiness Inspection Checklist
Weather, Ground, and Visibility Decision Triggers

Day 2: Loads, Lifting, and Rig-Down Controls

Equipment Inventory and Transport Load Schedule
Load Center, Restraint, and Trailer Selection Check
Lifting Plan and Rigging Gear Verification
Rig-Down Sequence and Exclusion-Zone Map
Stored-Energy Isolation and Equipment Release Permit

Day 3: Route and Convoy Execution

Utilities, Overhead Lines, and Clearance Control Plan
Convoy Order and Journey Communication Sheet
Ground Guide and Reversing Signal Protocol
Traffic Interface and One-Way Movement Layout
Fatigue, Lighting, and Night-Move Readiness Review

Day 4: Positioning and Multi-Party Control

Rig Spotting and Wellhead Alignment Procedure
Simultaneous Operations Interface Matrix
Contractor Coordination and Handover Board
Change, Stop-Work, and Restart Decision Gate
Emergency Access and Incident Response Map

Day 5: Rig Move Safety Practice

Exercise: Validate a Route and Site Readiness Pack
Exercise: Review a Load, Lifting, and Rig-Down Plan
Exercise: Control a Convoy and Positioning Deviation
Exercise: Test Contractor and Emergency Interfaces
Capstone Exercise: Integrated Rig Move Plan

Practical Exercises

The course uses land-drilling, well-servicing, heavy-haul, and remote-site scenarios.

Suggested activity: inspect a route and destination pack for access, utilities, ground, clearance, and weather constraints.
Suggested activity: review equipment loads, lifting points, rigging evidence, exclusion zones, and release permits.
Suggested activity: coordinate convoy communications, ground guides, contractor interfaces, and changing conditions.
Suggested activity: integrate sequence, responsibilities, permits, controls, hold points, emergency actions, and verification into an Integrated Rig Move Plan.

FAQs

Who suits advanced rig movement safety training, and what does it assume?

Advanced rig movement safety training suits professionals who already support drilling operations, heavy transport, lifting, logistics, contractor coordination, or field HSE decisions.

How does rig movement safety differ from general lifting safety training?

Rig movement safety integrates route, convoy, rig-down, transport, positioning, contractor, and site-readiness controls, while general lifting safety training concentrates on individual lifting operations and load-handling practices.

What should a rig move plan include?

A rig move plan should connect scope, sequence, responsibilities, route and site findings, equipment loads, lifting arrangements, convoy controls, permits, communications, hold points, emergency actions, and verification records.

How are rig move route hazards controlled?

Rig move route hazards are controlled through advance surveys, verified dimensions and loads, ground and access checks, utility and clearance controls, traffic arrangements, weather triggers, competent guides, and communicated stopping points.

How should changes during a rig move be managed?

Changes during a rig move should trigger a controlled stop, reassessment of hazards and interfaces, approval of revised controls, communication to affected parties, and a documented restart decision.

Conclusion

The course integrates rig-move scope, route and site readiness, loads, lifting, convoy movement, positioning, contractor interfaces, permits, and emergency control. Participants take back an Integrated Rig Move Plan that assigns responsibilities, sequences work, defines hold points, and records verification. The plan strengthens coordinated decisions across drilling, logistics, lifting, HSE, maintenance, and contractor teams.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 57 events

Location	Dates	Duration	Mode	Price
Dubai	Week 45, 2026 2 – 6 November 2026	1 Week	Onsite	€6,500
Phuket	Week 45, 2026 8 – 12 November 2026	1 Week	Onsite	€8,000
San Diego	Week 47, 2026 16 – 20 November 2026	1 Week	Onsite	€16,000
Casablanca	Week 48, 2026 23 – 27 November 2026	1 Week	Onsite	€6,000
Trabzon	Week 48, 2026 29 November – 3 December 2026	1 Week	Onsite	€8,000
Munich	Week 50, 2026 7 – 11 December 2026	1 Week	Onsite	€6,500
Johannesburg	Week 50, 2026 13 – 17 December 2026	1 Week	Onsite	€6,000
Frankfurt	Week 51, 2026 14 – 18 December 2026	1 Week	Onsite	€6,500
Cairo	Week 52, 2026 21 – 25 December 2026	1 Week	Onsite	€5,200
Berlin	Week 52, 2026 21 – 25 December 2026	1 Week	Onsite	€6,500
Amman	Week 52, 2026 27 – 31 December 2026	1 Week	Onsite	€6,000
Marbella	Week 52, 2026 27 – 31 December 2026	1 Week	Onsite	€6,500
Nice	Week 01, 2027 4 – 8 January 2027	1 Week	Onsite	€8,000
Toronto	Week 01, 2027 10 – 14 January 2027	1 Week	Onsite	€16,000
Madrid	Week 02, 2027 11 – 15 January 2027	1 Week	Onsite	€6,500
Langkawi	Week 02, 2027 17 – 21 January 2027	1 Week	Onsite	€8,000
Porto	Week 03, 2027 18 – 22 January 2027	1 Week	Onsite	€6,500
Montreux	Week 04, 2027 25 – 29 January 2027	1 Week	Onsite	€8,000
Seoul	Week 05, 2027 1 – 5 February 2027	1 Week	Onsite	€12,000
Abu Dhabi	Week 05, 2027 1 – 5 February 2027	1 Week	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewAdvanced Rig Movement and Safety Procedures Training Course is a one-week advanced course for drilling supervisors, rig movers, transport coordinators, HSE professionals, lifting teams, logistics planners, and contractor representatives who leave with an Integrated Rig Move Plan. Participants connect route and site readiness, loads, lifting, convo…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Rig Movement and Safety Procedures Training Course