Well Completion Design and Equipment Course

Name: Well Completion Design and Equipment Selection Training Course
Availability: InStock

Turn reservoir and well objectives into completion architecture, equipment specifications, installation plans, and life-cycle integrity decisions.

Well Completion Design and Equipment Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Kuwait, London, Trabzon, Tashkent, Vienna, New York and more
Next session: 8 – 12 November 2026, Kuwait
Average fee: 7,500 €

Home
Our Categories
Well Completion Design and Equipment Selection Training Course

Download Brochure (PDF) Print PDF

Overview

Well Completion Design and Equipment Selection Training Course is a one-week intermediate course for completion, production, drilling, reservoir, petroleum, well integrity, and operations functions who leave with a Well Completion Design File. Participants connect well completion design, completion architecture, production tubing, packer selection, flow control, sand control, installation, surveillance, and well integrity. The course turns reservoir and well objectives into traceable equipment and life-cycle decisions. Agile Leaders Training Center presents well completion design and equipment selection.

Who Should Attend

Functions responsible for completion design bases and architecture selection
Teams responsible for production tubing, packers, and downhole equipment
Functions responsible for reservoir access, inflow, and flow-control decisions
Groups responsible for well integrity, barriers, and operating envelopes
Teams responsible for installation, commissioning, and completion readiness
Operations functions responsible for surveillance and life-cycle performance

The course assumes participants interpret basic well, reservoir, pressure, temperature, and production data; it leaves out drilling-program design, detailed casing calculations, stimulation execution, and lift-system optimization.

Departments and Industries

The course supports departments and industries that design, install, operate, or assure production-well completions.

Onshore and offshore oil and gas production
Completion and petroleum engineering departments
Reservoir and production technology functions
Well integrity and technical assurance teams
Drilling, workover, and intervention organizations
Geothermal and subsurface production projects

Learning Objectives

By the end of this course, participants will be able to:

Analyze reservoir, well, and production design inputs
Compare openhole, cased-hole, single-zone, and multizone architectures
Build tubing, packer, valve, and accessory specifications
Evaluate sand-control, flow-control, and lift-readiness interfaces
Diagnose pressure, temperature, material, and integrity constraints
Prioritize installation, commissioning, surveillance, and life-cycle actions

Course Agenda

Day 1: Establish the Completion Design Basis

Reservoir, Well, and Production Objective Matrix
Pressure, Temperature, Rate, and Fluid Design Envelope
Well Geometry, Restriction, and Access Register
Completion Functional Requirements Document
Completion Design Risk and Assumption Log

Day 2: Select the Completion Architecture

Openhole and Cased-Hole Architecture Decision Tree
Single-Zone and Multizone Completion Schematic
Perforation, Inflow, and Flow-Control Interface Map
Sand-Control Screen and Gravel-Pack Selection Matrix
Stimulation and Artificial-Lift Readiness Checklist

Day 3: Specify Tubing and Downhole Equipment

Production-Tubing Size and Flow-Capacity Worksheet
Tubing Load, Movement, and Stress Case Register
API 11D1 Packer Functional Specification Sheet
Subsurface Safety Valve and Barrier Selection Matrix
Landing Nipple, Sliding Sleeve, and Accessory Schedule

Day 4: Assure Installation and Life-Cycle Integrity

Materials, Corrosion, Erosion, and Compatibility Register
Completion Barrier and Pressure-Test Verification Plan
Running Sequence and Installation Contingency Program
Commissioning and Production Handover Checklist
Completion Surveillance and Failure-Diagnostic Dashboard

Day 5: Practice Completion Decisions

Suggested Exercise: Reconcile a Completion Design Basis
Suggested Exercise: Select a Completion Architecture
Suggested Exercise: Specify Tubing, Packer, and Safety Equipment
Suggested Exercise: Resolve an Installation and Integrity Constraint
Capstone Exercise: Present a Well Completion Design File

Practical Exercises

The course uses suggested activities to convert reservoir, well, equipment, and operating evidence into coordinated completion decisions.

Suggested activity: define design limits from pressure, temperature, fluids, geometry, rate, access, and intervention evidence.
Suggested activity: compare openhole, cased-hole, single-zone, and multizone arrangements with sand- and flow-control interfaces.
Suggested activity: assemble tubing, packer, safety-valve, accessory, material, and pressure-test requirements.
Suggested activity: diagnose installation, barrier, surveillance, and life-cycle constraints and record response actions.

FAQs

Who suits well completion design training, and what does it assume?

Well completion design training suits completion, production, drilling, reservoir, petroleum, integrity, and operations functions. It assumes participants can interpret basic well, reservoir, pressure, temperature, and production data.

How does well completion design differ from advanced casing design?

Well completion design concentrates on reservoir access, production tubing, packers, safety equipment, flow control, sand control, installation, and life-cycle operation. Casing design concentrates on well-construction tubular loads, strength, setting depths, and casing integrity.

How is a well completion architecture selected?

A well completion architecture is selected by comparing reservoir access, zonal isolation, inflow control, sand risk, intervention needs, pressure and temperature, artificial-lift readiness, installation complexity, and life-cycle operating objectives.

What governs production tubing and packer selection?

Production tubing and packer selection is governed by flow capacity, well geometry, pressure differential, temperature, fluids, materials, loads, movement, connections, barriers, control lines, retrieval strategy, and the planned installation sequence.

What evidence supports well completion integrity decisions?

Well completion integrity decisions use equipment specifications, load cases, material limits, barrier schematics, pressure tests, running records, commissioning results, annulus trends, production response, surveillance data, and intervention history.

Conclusion

Participants take a Well Completion Design File back to their organization. It links design inputs, architecture, tubing, packers, safety equipment, flow and sand control, materials, installation, testing, commissioning, and surveillance. The file changes separate subsurface, equipment, and operations records into a traceable basis for completion selection, readiness reviews, handover, integrity monitoring, and life-cycle decisions.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 21-40 of 58 events

Location	Dates	Duration	Mode	Price
Athens	Week 10, 2027 8 – 12 March 2027	1 Week	Onsite	€7,500
Istanbul	Week 11, 2027 15 – 19 March 2027	1 Week	Onsite	€6,000
Frankfurt	Week 11, 2027 15 – 19 March 2027	1 Week	Onsite	€6,500
Marbella	Week 11, 2027 21 – 25 March 2027	1 Week	Onsite	€6,500
Sharm El-Sheikh	Week 14, 2027 5 – 9 April 2027	1 Week	Onsite	€5,200
Berlin	Week 15, 2027 12 – 16 April 2027	1 Week	Onsite	€6,500
Chicago	Week 16, 2027 25 – 29 April 2027	1 Week	Onsite	€16,000
Baku	Week 17, 2027 26 – 30 April 2027	1 Week	Onsite	€8,000
Manama	Week 17, 2027 2 – 6 May 2027	1 Week	Onsite	€6,500
Amsterdam	Week 19, 2027 10 – 14 May 2027	1 Week	Onsite	€6,500
Jakarta	Week 19, 2027 10 – 14 May 2027	1 Week	Onsite	€8,000
Geneva	Week 19, 2027 16 – 20 May 2027	1 Week	Onsite	€8,000
Dubai	Week 20, 2027 17 – 21 May 2027	1 Week	Onsite	€6,500
Amman	Week 20, 2027 23 – 27 May 2027	1 Week	Onsite	€6,000
Barcelona	Week 21, 2027 24 – 28 May 2027	1 Week	Onsite	€6,500
Prague	Week 23, 2027 7 – 11 June 2027	1 Week	Onsite	€7,500
Abu Dhabi	Week 24, 2027 14 – 18 June 2027	1 Week	Onsite	€6,500
Nice	Week 25, 2027 21 – 25 June 2027	1 Week	Onsite	€8,000
Addis Ababa	Week 26, 2027 28 June – 2 July 2027	1 Week	Onsite	€6,000
Cape town	Week 26, 2027 4 – 8 July 2027	1 Week	Onsite	€6,000

Frequently asked questions

What does this course cover?

OverviewWell Completion Design and Equipment Selection Training Course is a one-week intermediate course for completion, production, drilling, reservoir, petroleum, well integrity, and operations functions who leave with a Well Completion Design File. Participants connect well completion design, completion architecture, production tubing, packer selection…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Well Completion Design and Equipment Course