Advanced Drilling Fluids Engineering Course

Name: Advanced Drilling Fluids Engineering Training Course
Availability: InStock

Apply field tests, hydraulics, chemistry, and solids-control evidence to design and troubleshoot drilling-fluid systems.

Advanced Drilling Fluids Engineering Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Cape town, Marbella, Bangkok, Zanzibar, Langkawi, Kuwait and more
Next session: 15 – 19 November 2026, Cape town
Average fee: 7,500 €

Home
Our Categories
Advanced Drilling Fluids Engineering Training Course

Download Brochure (PDF) Print PDF

Overview

Advanced Drilling Fluids Engineering Training Course is a one-week advanced course for drilling-fluid, mud, and drilling engineers, wellsite supervisors, laboratory personnel, technical-service teams, and assurance reviewers who leave with a Drilling Fluid Design and Troubleshooting File. Participants apply advanced drilling fluids engineering to water-based drilling fluid testing, non-aqueous drilling fluid testing, drilling fluid rheology control, and drilling mud troubleshooting. The course turns field and laboratory evidence into auditable treatment decisions. Agile Leaders Training Center presents drilling-fluid engineering practice.

Who Should Attend

Functions responsible for drilling-fluid system design and treatment
Well teams responsible for hydraulics, pressure margins, and hole cleaning
Rig-site functions responsible for sampling, testing, and maintenance decisions
Laboratory functions responsible for fluid characterization and treatment trials
Technical-assurance functions responsible for mud-program review and traceability

The course assumes participants interpret mud reports, well data, and fluid calculations at work, and it leaves out introductory drilling, drilling safety, cementing, acidizing, and fracturing fluids.

Departments and Industries

The course supports departments and industries that design, operate, test, or assure circulating-fluid systems.

Oil and gas drilling, well engineering, and operations
Geothermal well construction and subsurface projects
Drilling-fluid laboratories and technical services
Rig contractors and solids-control service teams
Environmental, waste-interface, and operational-assurance functions

Learning Objectives

By the end of this course, participants will be able to:

Compare water-based and non-aqueous fluid-system options
Analyze rheology, hydraulics, density, and pressure-control data
Evaluate filtration, inhibition, and contamination treatments
Diagnose HPHT, lost-circulation, sag, and stuck-pipe risks
Prioritize solids-control, dilution, maintenance, and displacement actions
Build an auditable mud-program decision file

Course Agenda

Day 1: Establish the Fluid Design Basis

Well Section and Drilling-Fluid Design-Basis Register
Water-Based and Non-Aqueous System Selection Matrix
Density, Pore-Pressure, and Fracture-Margin Plot
Fluid Functions, Constraints, and Performance-Criteria Map
Mud Program Assumptions and Decision-Traceability Log

Day 2: Control Rheology, Hydraulics, and Filtration

Flow-Curve, Plastic-Viscosity, and Yield-Point Calculation Sheet
Gel-Strength, Surge, Swab, and Equivalent-Circulating-Density Model
Hole-Cleaning and Annular-Velocity Performance Map
API RP 13B-1 and RP 13B-2 Field-Test Workflow
Filtration, Filter-Cake, and Permeability-Plugging Evaluation Method

Day 3: Manage Chemistry and Contamination

Clay Hydration and Shale-Inhibition Selection Matrix
Salinity, Alkalinity, Hardness, and Chemical-Conditioning Test Sheet
Solids, Oil-Water Ratio, and Electrical-Stability Interpretation Method
Cement, Salt, Calcium, Carbonate, and Drill-Solids Contamination Diagnostic Tree
Treatment Pilot-Test and Product-Concentration Decision Record

Day 4: Assure Field Performance

HPHT Rheology, Filtration, and Sag Risk Review
Lost-Circulation Severity and Material-Selection Matrix
Differential-Sticking and Wellbore-Stability Prevention Checklist
API RP 13C Solids-Control Equipment Performance Review
Dilution, Maintenance, Displacement, and Waste-Interface Plan

Day 5: Practice Fluid Design and Troubleshooting

Suggested Exercise: Interpret a Field Mud-Test Report
Suggested Exercise: Diagnose Rheology and Contamination Trends
Suggested Exercise: Select Lost-Circulation and Stuck-Pipe Controls
Suggested Exercise: Optimize Solids-Control and Maintenance Actions
Capstone Exercise: Complete the Drilling Fluid Design and Troubleshooting File

Practical Exercises

The course uses suggested activities to convert measurements and well constraints into traceable fluid decisions.

Suggested activity: compare fluid systems against formation, temperature, pressure, environmental, and operational constraints.
Suggested activity: calculate rheology indicators and diagnose hydraulics, filtration, and hole-cleaning performance.
Suggested activity: identify contamination signatures and document treatment trials, dilution, and solids-control actions.
Suggested activity: assemble a mud-program decision file with monitoring limits, response actions, and assurance evidence.

FAQs

Who suits advanced drilling fluids engineering training, and what does it assume?

Advanced drilling fluids engineering training suits fluid, mud, drilling, laboratory, wellsite, technical-service, and assurance personnel. It assumes participants interpret mud reports, well data, and engineering calculations.

How does advanced drilling fluids engineering differ from general drilling training?

Advanced drilling fluids engineering focuses on fluid selection, measurement, treatment, hydraulics, solids control, and troubleshooting. General drilling training covers the wider well-construction sequence, equipment, practices, and operational coordination.

How is drilling fluid rheology control evaluated?

Drilling fluid rheology control uses viscometer readings, flow-model parameters, plastic viscosity, yield point, gel strength, temperature behavior, hydraulic calculations, and trend evidence to balance suspension, transport, pressure loss, and restart behavior.

What drives drilling mud troubleshooting decisions?

Drilling mud troubleshooting combines verified sampling, field and laboratory tests, trend comparison, well events, material balances, treatment trials, and system constraints before selecting chemical, dilution, mechanical-separation, or operational responses.

How are HPHT drilling-fluid risks managed?

HPHT drilling-fluid risks are managed by testing temperature and pressure effects on rheology, filtration, sag, stability, fluid loss, and material compatibility, then documenting operating limits, monitoring frequency, contingencies, and treatment criteria.

Conclusion

Participants take back a Drilling Fluid Design and Troubleshooting File linking system selection, test evidence, hydraulics, chemistry, solids control, treatment, and contingencies. It changes separate mud reports and well observations into a traceable decision path. The file supports field monitoring, technical review, treatment approval, displacement planning, and performance improvement.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 58 events

Location	Dates	Duration	Mode	Price
Cape town	Week 46, 2026 15 – 19 November 2026	1 Week	Onsite	€6,000
Marbella	Week 46, 2026 15 – 19 November 2026	1 Week	Onsite	€6,500
Bangkok	Week 47, 2026 22 – 26 November 2026	1 Week	Onsite	€8,000
Zanzibar	Week 48, 2026 29 November – 3 December 2026	1 Week	Onsite	€6,000
Langkawi	Week 49, 2026 6 – 10 December 2026	1 Week	Onsite	€8,000
Kuwait	Week 49, 2026 6 – 10 December 2026	1 Week	Onsite	€7,000
Madrid	Week 51, 2026 14 – 18 December 2026	1 Week	Onsite	€6,500
Addis Ababa	Week 51, 2026 14 – 18 December 2026	1 Week	Onsite	€6,000
London	Week 52, 2026 21 – 25 December 2026	1 Week	Onsite	€6,500
Amman	Week 52, 2026 27 – 31 December 2026	1 Week	Onsite	€6,000
London	Week 01, 2027 4 – 8 January 2027	1 Week	Onsite	€6,500
Nice	Week 01, 2027 4 – 8 January 2027	1 Week	Onsite	€8,000
Dubai	Week 03, 2027 18 – 22 January 2027	1 Week	Onsite	€6,500
Abu Dhabi	Week 03, 2027 18 – 22 January 2027	1 Week	Onsite	€6,500
Muscat	Week 03, 2027 24 – 28 January 2027	1 Week	Onsite	€6,500
Zoom	Week 04, 2027 25 – 29 January 2027	1 Week	Online	€3,000
Bali	Week 04, 2027 31 January – 4 February 2027	1 Week	Onsite	€6,500
Porto	Week 05, 2027 1 – 5 February 2027	1 Week	Onsite	€6,500
Trabzon	Week 06, 2027 14 – 18 February 2027	1 Week	Onsite	€8,000
San Diego	Week 07, 2027 15 – 19 February 2027	1 Week	Onsite	€16,000

Frequently asked questions

What does this course cover?

OverviewAdvanced Drilling Fluids Engineering Training Course is a one-week advanced course for drilling-fluid, mud, and drilling engineers, wellsite supervisors, laboratory personnel, technical-service teams, and assurance reviewers who leave with a Drilling Fluid Design and Troubleshooting File. Participants apply advanced drilling fluids engineering to…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Advanced Drilling Fluids Engineering Course