Advanced UPS Systems and Battery Chargers Course

Name: Advanced UPS Systems and Battery Chargers Training Course
Availability: InStock

Evaluate UPS architecture, battery autonomy, commissioning evidence, failure causes, and lifecycle choices for critical-power assets.

Advanced UPS Systems and Battery Chargers Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: London, Dubai, Marbella, Bali, Muscat, Bangkok and more
Next session: 19 – 23 October 2026, London
Average fee: 7,500 €

Home
Our Categories
Advanced UPS Systems and Battery Chargers Training Course

Download Brochure (PDF) Print PDF

Overview

Advanced UPS Systems and Battery Chargers Training Course is a 1-week course for critical-power engineers, maintenance teams, commissioning specialists, facility engineers, and technical managers who need a UPS Commissioning and Lifecycle Decision File. Participants evaluate topologies, rectifier and inverter behavior, static bypass arrangements, battery autonomy, harmonics, redundancy, test evidence, faults, and replacement choices. The course connects measurements and failure symptoms with defensible operating decisions. Agile Leaders Training Center provides this advanced UPS systems course.

Who Should Attend

Professionals responsible for UPS architecture, capacity, redundancy, and critical-load continuity.
Teams responsible for electrical maintenance, alarm response, and failure diagnosis.
Specialists responsible for commissioning, acceptance testing, and load-bank evidence.
Personnel responsible for battery condition, autonomy, charger settings, and replacement planning.
Managers responsible for reliability risk, lifecycle cost, and technical approvals.

The course assumes participants already interpret electrical drawings, measurements, alarms, and maintenance records, and leaves out introductory circuit theory.

Departments and Industries

The course supports critical-power decisions across data centers, industrial plants, utilities, healthcare facilities, transport infrastructure, and commercial buildings.

Electrical engineering and critical-power operations
Maintenance, reliability, and asset-management departments
Commissioning and project-delivery teams
Data-center and telecommunications facilities
Process industry, healthcare, and transport infrastructure

Learning Objectives

By the end of this course, participants will be able to:

Compare UPS topologies against critical-load requirements.
Analyze rectifier, inverter, bypass, and harmonic behavior.
Build battery autonomy and charger-sizing calculations.
Evaluate redundancy, selectivity, and parallel-operation risks.
Apply performance, commissioning, and load-bank test methods.
Diagnose failures and prioritize lifecycle interventions.

Course Agenda

Day 1: UPS Architecture and Load Evidence

Critical-Load Classification and Single-Line Evidence Map
Online Double-Conversion, Line-Interactive, and Standby Topology Comparison
IEC 62040 Safety, EMC, and Performance Requirements Map
Rectifier, DC Link, Inverter, and Output Filter Functional Model
Load Profile, Crest Factor, and Capacity Margin Worksheet

Day 2: Power Quality and Switching Paths

Input Power Factor and Current Harmonic Assessment
Inverter Voltage Regulation and Transient Response Test Method
Static Bypass Transfer Logic and Synchronization Checklist
Maintenance Bypass Isolation and Backfeed Risk Review
Protection Selectivity and Fault-Current Coordination Matrix

Day 3: Batteries, Chargers, and Autonomy

Battery Chemistry, String Configuration, and DC Bus Selection Matrix
Autonomy, Aging Margin, and Temperature Derating Calculation
Rectifier-Charger Float, Boost, and Current-Limit Setting Sheet
IEEE 1188 Inspection, Test, and Replacement Evidence Register
Battery Impedance, Conductance, and Capacity Trend Assessment

Day 4: Redundancy, Commissioning, and Diagnosis

N+1 and Parallel UPS Redundancy Decision Model
Commissioning Inspection and Energization Control Plan
Load-Bank Step Test and Thermal Evidence Sheet
Alarm Sequence, Event Log, and Waveform Correlation Method
Failure Mode, Root-Cause, and Lifecycle Priority Matrix

Day 5: UPS Decision Practice

Suggested Exercise: Topology and Capacity Selection Review
Suggested Exercise: Battery Autonomy and Charger Setting Calculation
Suggested Exercise: Static Bypass Transfer Failure Diagnosis
Suggested Exercise: Commissioning and Load-Bank Evidence Evaluation
Capstone Exercise: UPS Commissioning and Lifecycle Decision File

Practical Exercises

The course uses suggested activities to convert system data, measurements, and maintenance evidence into traceable decisions.

Suggested activity: compare UPS topologies for a mixed critical-load profile.
Suggested activity: calculate battery autonomy under aging and temperature conditions.
Suggested activity: diagnose a bypass transfer using alarms and waveforms.
Suggested activity: present a commissioning and lifecycle recommendation with supporting evidence.

FAQs

Who suits Advanced UPS Systems and Battery Chargers Training and what does it assume?

Critical-power, maintenance, commissioning, facility, reliability, and technical-management personnel suit the course. It assumes experience with electrical drawings, measurements, alarms, and maintenance records while excluding introductory circuit theory.

How does Advanced UPS Systems Training differ from a basic electrical maintenance course?

Advanced UPS Systems Training focuses on topology selection, static switching, harmonics, autonomy, redundancy, performance tests, diagnostic evidence, and lifecycle decisions rather than general electrical inspection and repair.

How is UPS battery autonomy calculated for an aging battery string?

UPS battery autonomy is evaluated from load demand, DC voltage, discharge characteristics, temperature, aging margin, string configuration, charger limits, and the required continuity period.

What evidence supports UPS commissioning acceptance?

UPS commissioning acceptance uses inspection records, protection settings, functional tests, transfer tests, load-bank results, waveform evidence, alarms, thermal observations, and documented exceptions.

When should stationary UPS batteries be replaced?

Stationary UPS battery replacement is prioritized from capacity evidence, condition trends, abnormal cells, temperature history, failure risk, manufacturer criteria, and the continuity consequence of further service.

Conclusion

Participants take back a UPS Commissioning and Lifecycle Decision File linking load requirements, architecture, autonomy, settings, tests, faults, and replacement evidence. The file improves traceability from system measurement to technical approval. It also exposes continuity risks and required interventions before a critical-power decision is implemented.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 21-40 of 57 events

Location	Dates	Duration	Mode	Price
Accra	Week 08, 2027 28 February – 4 March 2027	1 Week	Onsite	€6,000
Amman	Week 09, 2027 7 – 11 March 2027	1 Week	Onsite	€6,000
Athens	Week 11, 2027 15 – 19 March 2027	1 Week	Onsite	€7,500
Singapore	Week 12, 2027 22 – 26 March 2027	1 Week	Onsite	€6,500
Geneva	Week 12, 2027 28 March – 1 April 2027	1 Week	Onsite	€8,000
Barcelona	Week 14, 2027 5 – 9 April 2027	1 Week	Onsite	€6,500
Jakarta	Week 15, 2027 12 – 16 April 2027	1 Week	Onsite	€8,000
Johannesburg	Week 15, 2027 18 – 22 April 2027	1 Week	Onsite	€6,000
Cairo	Week 17, 2027 26 – 30 April 2027	1 Week	Onsite	€5,200
Lisbon	Week 17, 2027 26 – 30 April 2027	1 Week	Onsite	€6,500
Rome	Week 19, 2027 10 – 14 May 2027	1 Week	Onsite	€6,500
Porto	Week 19, 2027 10 – 14 May 2027	1 Week	Onsite	€6,500
Doha	Week 19, 2027 16 – 20 May 2027	1 Week	Onsite	€7,000
Abu Dhabi	Week 21, 2027 24 – 28 May 2027	1 Week	Onsite	€6,500
Istanbul	Week 22, 2027 31 May – 4 June 2027	1 Week	Onsite	€6,000
Berlin	Week 22, 2027 31 May – 4 June 2027	1 Week	Onsite	€6,500
Prague	Week 23, 2027 7 – 11 June 2027	1 Week	Onsite	€7,500
Madrid	Week 24, 2027 14 – 18 June 2027	1 Week	Onsite	€6,500
New York	Week 25, 2027 21 – 25 June 2027	1 Week	Onsite	€16,000
Montreux	Week 26, 2027 28 June – 2 July 2027	1 Week	Onsite	€8,000

Frequently asked questions

What does this course cover?

OverviewAdvanced UPS Systems and Battery Chargers Training Course is a 1-week course for critical-power engineers, maintenance teams, commissioning specialists, facility engineers, and technical managers who need a UPS Commissioning and Lifecycle Decision File. Participants evaluate topologies, rectifier and inverter behavior, static bypass arrangements,…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Advanced UPS Systems and Battery Chargers Course