American Code Structural Steel Design Course

Name: American Code Structural Steel Design Course
Availability: InStock

Coordinate loads, member checks, stability, connections, calculations, and drawings for traceable steel building design.

At a glance

Duration: 5 days
Format: Classroom
Cities: Vienna, Berlin, Doha, Porto, Amman, Manama and more
Next session: 12 – 16 October 2026, Vienna
Average fee: 7,550 €

Home
Our Categories
American Code Structural Steel Design Course

Download Brochure (PDF) Print PDF

Overview

American Code Structural Steel Design Course is a five-day intermediate course for structural and civil engineers, design reviewers, consultants, project engineers, and technical-office teams who leave with a Steel Building Design Package. Participants coordinate structural systems, load paths, IBC requirements, ASCE 7 loads, AISC 360 member design, AISC 341 seismic provisions, stability, connections, calculations, and drawings. The course turns separate checks into a traceable design workflow. Agile Leaders Training Center presents American code structural steel design through applied engineering artifacts.

Who Should Attend

Teams responsible for selecting structural steel systems and establishing load paths
Functions calculating design loads, combinations, member actions, and serviceability effects
Personnel checking steel members, stability, bolted connections, and welded connections
Groups coordinating wind, seismic, architectural, fabrication, and construction requirements
Reviewers responsible for calculation notes, design assumptions, drawings, and technical comments

The course assumes participants can perform structural analysis and interpret engineering drawings, and it leaves out introductory statics, software instruction, fabrication qualification, and jurisdiction-specific approval procedures.

Departments and Industries

The course supports departments and industries responsible for steel building analysis, design, coordination, and technical review.

Structural and civil engineering design offices
Building, industrial, energy, transport, and logistics projects
Steel fabrication, erection, and construction engineering
Project management, technical offices, and design assurance
Asset development, facilities engineering, and engineering consultancy

Learning Objectives

By the end of this course, participants will be able to:

Analyze structural systems, load paths, design criteria, and code interfaces
Apply ASCE 7 loads and combinations within an IBC design basis
Evaluate AISC 360 tension, compression, flexure, shear, and combined-action checks
Diagnose frame stability, second-order effects, and serviceability conditions
Build bolted, welded, seismic, and wind coordination design criteria
Develop a Steel Building Design Package

Course Agenda

Day 1: Design Basis and Structural Systems

IBC Structural Design Basis Checklist
Steel Framing System Selection Matrix
Gravity and Lateral Load-Path Diagram
ASCE 7 Risk and Design-Criteria Register
AISC 303 Design Responsibility Matrix

Day 2: Loads, Analysis, and Stability

ASCE 7 Load Identification Worksheet
Strength and Allowable-Stress Load Combination Table
Structural Analysis Assumption Register
AISC 360 Stability Analysis Decision Tree
Second-Order Effects and Serviceability Check Sheet

Day 3: Steel Member Design

AISC 360 Tension Member Design Check
AISC 360 Compression Member Buckling Check
AISC 360 Flexural Member Limit-State Check
Shear, Torsion, and Combined-Action Interaction Review
Member Selection and Utilization Schedule

Day 4: Connections and Lateral Coordination

Bolted Connection Limit-State Calculation
Welded Connection Strength and Detailing Check
Connection Force-Transfer and Constructability Map
AISC 341 Seismic System Coordination Checklist
Wind-Resisting System and Drift Review

Day 5: Structural Steel Design Practice

Exercise: Establish the Design Basis and Load Path
Exercise: Assemble Loads, Combinations, and Stability Checks
Exercise: Verify Members and Connection Criteria
Exercise: Coordinate Calculation Notes and Design Drawings
Capstone Exercise: Steel Building Design Package

Practical Exercises

The course uses suggested activities to connect code requirements, engineering calculations, design review, and documentation.

Suggested activity: select a framing system and record the design basis, risk criteria, gravity path, lateral path, responsibilities, and assumptions.
Suggested activity: assemble loads and combinations, test stability and serviceability, and document analysis decisions for an industrial or commercial frame.
Suggested activity: check representative tension, compression, flexural, shear, bolted, and welded components and record governing limit states.
Suggested activity: integrate seismic and wind coordination, calculations, comments, drawing interfaces, and review evidence in a Steel Building Design Package.

FAQs

Who suits the American code structural steel design course and what does it assume?

It suits engineering teams responsible for steel building design and review, and assumes they can perform structural analysis, use engineering calculations, and interpret structural drawings.

How does American code structural steel design differ from structural analysis training?

American code structural steel design applies analysis results to code-defined loads, combinations, member limit states, stability, connections, seismic coordination, serviceability, calculations, and drawings, while general structural analysis training concentrates on modeling structural response.

How do IBC, ASCE 7, and AISC 360 work together in steel design?

IBC establishes the building-code basis, ASCE 7 supplies design loads and combinations, and AISC 360 provides requirements for structural steel member and system design using strength or allowable-stress methods.

Why is stability analysis important in structural steel design?

Stability analysis accounts for member and frame behavior, effective stiffness, second-order effects, imperfections, bracing assumptions, and the interaction between applied forces and structural deformation.

What belongs in a Steel Building Design Package?

The package records the design basis, systems, load paths, criteria, loads, combinations, analysis assumptions, member checks, connection criteria, lateral coordination, calculation notes, drawing interfaces, review comments, and resolutions.

Conclusion

Participants take back a Steel Building Design Package linking code criteria, load paths, analysis assumptions, member and connection checks, lateral coordination, calculations, and drawings. It changes isolated calculations into a traceable engineering review sequence. The package supports design decisions without replacing project-specific analysis, professional judgment, or applicable approval processes.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-56 of 56 events

Location	Dates	Duration	Mode	Price
New York	Week 23, 2027 7 – 11 June 2027	5 Days	Onsite	€16,000
Dubai	Week 25, 2027 21 – 25 June 2027	5 Days	Onsite	€6,500
Istanbul	Week 26, 2027 28 June – 2 July 2027	5 Days	Onsite	€6,000
Baku	Week 27, 2027 5 – 9 July 2027	5 Days	Onsite	€8,000
Trabzon	Week 27, 2027 11 – 15 July 2027	5 Days	Onsite	€8,000
Jakarta	Week 28, 2027 12 – 16 July 2027	5 Days	Onsite	€8,000
Paris	Week 29, 2027 19 – 23 July 2027	5 Days	Onsite	€6,500
Munich	Week 31, 2027 2 – 6 August 2027	5 Days	Onsite	€6,500
Toronto	Week 31, 2027 8 – 12 August 2027	5 Days	Onsite	€16,000
London	Week 32, 2027 9 – 13 August 2027	5 Days	Onsite	€6,500
Tokyo	Week 34, 2027 23 – 27 August 2027	5 Days	Onsite	€12,000
Abu Dhabi	Week 34, 2027 23 – 27 August 2027	5 Days	Onsite	€6,500
Barcelona	Week 35, 2027 30 August – 3 September 2027	5 Days	Onsite	€6,500
Bali	Week 35, 2027 5 – 9 September 2027	5 Days	Onsite	€6,500
Casablanca	Week 37, 2027 13 – 17 September 2027	5 Days	Onsite	€6,000
Dubai	Week 41, 2027 11 – 15 October 2027	5 Days	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewAmerican Code Structural Steel Design Course is a five-day intermediate course for structural and civil engineers, design reviewers, consultants, project engineers, and technical-office teams who leave with a Steel Building Design Package. Participants coordinate structural systems, load paths, IBC requirements, ASCE 7 loads, AISC 360 member desig…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

American Code Structural Steel Design Course