Geotechnical Engineering and Soil Analysis Course

Name: Geotechnical Engineering and Soil Analysis Training Course
Availability: InStock

Master soil classification, laboratory shear testing, foundation settlement analysis, and ground hazard mitigation.

Geotechnical Engineering and Soil Analysis Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Accra, Jakarta, Bali, Zanzibar, Athens, Tbilisi and more
Next session: 16 – 20 November 2026, Accra
Average fee: 7,500 €

Home
Our Categories
Geotechnical Engineering and Soil Analysis Training Course

Overview

The Geotechnical Engineering and Soil Analysis Training Course is a one-week course for civil engineers, foundation design specialists, and geotechnical project managers who leave with an engineered foundation design dossier and soil characterization register. Inadequate assessment of problematic ground, miscalculated bearing capacities, and undetected soil volume changes cause severe foundation settlement and structural cracking across industrial and civil developments. This course delivers rigorous design methodologies for laboratory classification, field logging, settlement prediction, and earthwork quality control under SBC 303, ASTM standards, and SAES-A-113 criteria. Agile Leaders Training Center delivers the Geotechnical Engineering and Soil Analysis Training Course.

Who Should Attend

Civil engineers designing shallow footings, deep pile systems, and earth retaining structures.
Geotechnical project engineers evaluating borehole logs, electronic piezocone soundings, and laboratory testing data.
Site preparation managers supervising mass grading, subgrade compaction, and borrow pit earthworks.
Structural engineers incorporating soil stiffness coefficients, presumptive bearing pressures, and differential settlement tolerances into superstructure models.
Infrastructure quality managers auditing geotechnical compliance documentation and field testing reports.

The course assumes participants actively evaluate engineering mechanics and interpret civil infrastructure blueprints, leaving out basic soil physics terminology and elementary statics equations.

Departments and Industries

The course draws operational scenarios from industrial infrastructure development and heavy civil construction.

Civil engineering and structural infrastructure design divisions
Industrial plant engineering and petrochemical facility construction units
Commercial building development and geotechnical consulting practices
Transportation infrastructure, bridge foundation, and highway earthwork divisions
Municipal utility expansion and heavy ground engineering operations

Learning Objectives

By the end of this course, participants will be able to:

Apply SBC 303 and ASTM standards to classify field soils using Unified Soil Classification System procedures.
Analyze Standard Penetration Testing and Cone Penetration Testing soundings to calculate allowable bearing capacities.
Evaluate laboratory compaction curves against the 95 percent Maximum Dry Density subgrade requirement under ASTM D698.
Diagnose volumetric expansion hazards in expansive clays and collapse mechanisms in arid collapsible horizons.
Design shallow strip and pad footings maintaining the mandatory 1.0-meter minimum embedment depth under SBC 201.
Build an engineered foundation design dossier and soil characterization register for complex ground conditions.

Course Agenda

Day 1: Ground Investigation Frameworks and Soil Classification

Geotechnical investigation scopes and borehole spacing criteria under SBC 303 Chapter 2
Unified Soil Classification System laboratory protocols and Atterberg limits determination
Standard Penetration Testing energy ratios and borehole sampling techniques
Electronic piezocone penetration testing logging and pore pressure dissipation analysis
Onshore geotechnical technical submission protocols governed by SAES-A-113 requirements

Day 2: Soil Mechanics, Compaction, and Strength Characterization

Direct shear testing evaluation and effective shear strength parameters
Consolidated undrained triaxial compression testing and Mohr-Coulomb failure envelopes
Moisture-density relationships and compaction verification using ASTM D698 methods
Field subgrade compaction control reaching 95 percent Maximum Dry Density thresholds
Lateral earth pressure computation for retaining wall stability assessments

Day 3: Problematic Soils and Ground Risk Mitigation

Expansive soil identification, swell pressure testing, and chemical stabilization options
Deep arid collapsible soil mechanics and hydro-collapse settlement estimation
Sabkha soil geotechnical properties, saline flats geochemistry, and ground improvement solutions
Sand drift hazards, dune migration risk mitigation, and industrial site grading design
Borrow pit qualification criteria and structural fill selection under SAES-A-111 guidelines

Day 4: Foundation Design and Settlement Computation

Presumptive bearing capacity benchmarks for dense sands and cohesive clay strata
Minimum foundation embedment depth compliance set at 1.0 meter under SBC 201
Elastic settlement analysis and one-dimensional consolidation settlement estimation
Single and group pile axial capacity calculations utilizing static analysis methods
Excavation support design, dewatering impacts, and backfill execution under SAES-A-114

Day 5: Practical Engineering Calculations and Capstone Case

Suggested activity: Calculate allowable bearing capacity and immediate settlement for shallow footings
Suggested activity: Evaluate Cone Penetration Testing data to delineate sabkha soil horizons
Suggested activity: Formulate subgrade compaction test review sheets compliant with ASTM standards
Suggested activity: Check deep foundation pile load capacities against lateral earth pressure limits
Capstone exercise: Assemble an engineered foundation design dossier and soil characterization register for an industrial facility

Practical Exercises

The course uses authentic geotechnical borelogs, soil laboratory curves, and foundation layout prints.

Suggested activity: Interpret triaxial and direct shear test data to establish drained soil parameters.
Suggested activity: Calculate bearing capacity and footing settlement under SBC 303 design rules.
Suggested activity: Formulate ground mitigation strategies for collapsible and saline sabkha soils.
Suggested activity: Review field density tests to verify the 95 percent Maximum Dry Density standard.

FAQs

Who suits the Geotechnical Engineering and Soil Analysis Training Course?

The Geotechnical Engineering and Soil Analysis Training Course suits civil engineers, geotechnical practitioners, and structural foundation designers. The course assumes participants calculate structural loadings and interpret soil mechanics data, leaving out elementary physics concepts and basic surveying operations.

How does this course differ from general site characterization courses?

General site characterization courses focus on borehole drilling logistics and basic sampling methods. The Geotechnical Engineering and Soil Analysis Training Course delivers advanced engineering calculations, foundation bearing capacity determination, laboratory strength interpretation, and specialized design strategies for sabkha and collapsible soils.

What specific soil conditions does the Geotechnical Engineering and Soil Analysis Training Course address?

The Geotechnical Engineering and Soil Analysis Training Course addresses problematic desert and coastal soils, including saline sabkha flats, collapsible arid deposits, and expansive clays, alongside dense sands and bedrock formations governed by SBC 303 guidelines.

What foundation standards does the Geotechnical Engineering and Soil Analysis Training Course utilize?

The Geotechnical Engineering and Soil Analysis Training Course utilizes SBC 303 foundation criteria, SBC 201 minimum embedment guidelines, SAES-A-113 onshore requirements, and relevant ASTM standards for laboratory classification and compaction verification.

Conclusion

Participants return with an engineered foundation design dossier and soil characterization register ready for direct application in capital works. This comprehensive technical package eliminates bearing capacity estimation errors, prevents differential settlement, and ensures earthworks achieve mandatory subgrade compaction thresholds. Adopting these structured engineering practices protects structural integrity and streamlines regulatory approvals across industrial and civil infrastructure projects.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 58 events

Location	Dates	Duration	Mode	Price
Accra	Week 47, 2026 16 – 20 November 2026	1 Week	Onsite	€6,330
Jakarta	Week 50, 2026 7 – 11 December 2026	1 Week	Onsite	€8,000
Bali	Week 50, 2026 13 – 17 December 2026	1 Week	Onsite	€6,500
Zanzibar	Week 51, 2026 20 – 24 December 2026	1 Week	Onsite	€6,000
Athens	Week 53, 2026 28 December 2026 – 1 January 2027	1 Week	Onsite	€7,500
Tbilisi	Week 01, 2027 4 – 8 January 2027	1 Week	Onsite	€5,700
Doha	Week 01, 2027 10 – 14 January 2027	1 Week	Onsite	€7,000
Amsterdam	Week 03, 2027 18 – 22 January 2027	1 Week	Onsite	€6,500
Trabzon	Week 03, 2027 24 – 28 January 2027	1 Week	Onsite	€8,000
Addis Ababa	Week 04, 2027 25 – 29 January 2027	1 Week	Onsite	€6,000
Dubai	Week 05, 2027 1 – 5 February 2027	1 Week	Onsite	€6,500
Manama	Week 06, 2027 14 – 18 February 2027	1 Week	Onsite	€6,500
Muscat	Week 08, 2027 28 February – 4 March 2027	1 Week	Onsite	€6,500
Montreux	Week 10, 2027 8 – 12 March 2027	1 Week	Onsite	€8,000
Madrid	Week 11, 2027 15 – 19 March 2027	1 Week	Onsite	€6,500
Chicago	Week 11, 2027 21 – 25 March 2027	1 Week	Onsite	€16,000
Zoom	Week 13, 2027 29 March – 2 April 2027	1 Week	Online	€3,000
Porto	Week 13, 2027 29 March – 2 April 2027	1 Week	Onsite	€6,500
Baku	Week 14, 2027 5 – 9 April 2027	1 Week	Onsite	€8,000
London	Week 15, 2027 12 – 16 April 2027	1 Week	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewThe Geotechnical Engineering and Soil Analysis Training Course is a one-week course for civil engineers, foundation design specialists, and geotechnical project managers who leave with an engineered foundation design dossier and soil characterization register. Inadequate assessment of problematic ground, miscalculated bearing capacities, and undet…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Geotechnical Engineering and Soil Analysis Course