Heavy Lifting and Project Cargo Transport Course

Name: Advanced Heavy Lifting and Project Cargo Transport Training Course
Availability: InStock

Engineer crane, rigging, SPMT, route, and marine controls for verifiable heavy-lift and project-cargo execution.

Heavy Lifting and Project Cargo Transport Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Paris, Lisbon, Doha, Cairo, Johannesburg, Dubai and more
Next session: 9 – 13 November 2026, Paris
Average fee: 7,500 €

Home
Our Categories
Advanced Heavy Lifting and Project Cargo Transport Training Course

Overview

Advanced Heavy Lifting and Project Cargo Transport Training Course is a one-week advanced course for lift and transport engineers, supervisors, rigging planners, project teams, marine operations, HSE personnel, and assurance reviewers who leave with a Heavy Lift and Transport Execution Plan. Participants integrate engineered heavy lifting, critical lift planning, SPMT transport, project cargo route surveys, and marine load-out controls. The course converts load data and site constraints into verifiable execution decisions. Agile Leaders Training Center presents heavy-lift and project-cargo engineering practice.

Who Should Attend

Engineering functions responsible for crane selection, lift calculations, and rigging design
Transport functions responsible for SPMT configuration, route surveys, and exceptional loads
Marine operations responsible for load-out, barge interfaces, sea fastening, and weather criteria
Construction teams responsible for site readiness and execution coordination
HSE and assurance functions responsible for controls, verification, and authorization

The course assumes participants interpret load drawings, crane charts, rigging data, transport layouts, and method statements, and it leaves out basic rigging, routine material handling, general safety induction, and generic project management.

Departments and Industries

The course supports departments and industries that engineer and execute heavy lifts and exceptional-load movements.

Oil, gas, petrochemical, and process-plant construction
Offshore wind, marine construction, and port operations
Power generation, transmission, and industrial installation
Heavy-haul, modular transport, and project logistics
EPC, lifting services, technical assurance, and marine warranty support

Learning Objectives

By the end of this course, participants will be able to:

Analyze load, center-of-gravity, stability, and interface data
Evaluate crane, rigging, ground-support, and tandem-lift arrangements
Build SPMT configurations and heavy-haul route plans
Apply load-out, barge, sea-fastening, and weather controls
Prioritize communications, contingencies, rescue, and stop-work criteria
Build an auditable lift and transport execution plan

Course Agenda

Day 1: Establish the Engineering Basis

Load Definition, Center-of-Gravity, and Stability Data Sheet
Lift Classification and Criticality Screening Matrix
ISO 12480-1 Safe-System-of-Work Requirements Map
Onshore, Quayside, and Offshore Interface Register
Heavy Lift and Transport Design-Basis Document

Day 2: Engineer Cranes and Rigging

Crane Capacity Chart and Configuration Selection Method
Ground-Bearing Pressure and Crane-Mat Design Worksheet
Sling, Shackle, Spreader-Beam, and Lifting-Point Load Model
Tandem-Lift Load-Share and Tail-Crane Control Plan
Rigging Geometry, Tolerance, and Equipment Verification Checklist

Day 3: Plan Project Cargo Transport

SPMT Axle-Line, Hydraulic-Group, and Stability Configuration Sheet
Trailer and SPMT Load Distribution Calculation Method
Heavy-Haul Route Survey and Clearance Register
Bridge, Pavement, Gradient, Turning, and Obstruction Review
Loading, Jacking, Support, and Controlled-Transfer Procedure

Day 4: Integrate Marine and Execution Controls

DNV-ST-N001 Marine Operation Load-Case Review
Load-Out, Load-In, Barge-Ballast, and Mooring Interface Plan
Sea-Fastening, Voyage, and Structural-Restraint Verification Record
Weather Window, Wind Limit, and Environmental Criteria Matrix
Communication, Hold-Point, Contingency, and Rescue Control Sheet

Day 5: Practice Lift and Transport Execution

Suggested Exercise: Select Crane, Rigging, and Ground Support
Suggested Exercise: Configure SPMT and Validate the Route
Suggested Exercise: Plan Tandem Lift and Load Transfer
Suggested Exercise: Verify Marine, Weather, and Contingency Controls
Capstone Exercise: Complete the Heavy Lift and Transport Execution Plan

Practical Exercises

The course uses suggested activities to turn load, equipment, route, and marine evidence into traceable execution controls.

Suggested activity: calculate load paths and compare crane configurations, rigging geometry, ground support, and tandem-lift tolerances.
Suggested activity: configure SPMT axle lines and evaluate route clearances, gradients, turns, pavement, bridges, and transfer supports.
Suggested activity: connect load-out sequencing, ballast, mooring, sea fastening, weather limits, communications, and hold points.
Suggested activity: document verification evidence, contingencies, rescue arrangements, approvals, and execution records.

FAQs

Who suits advanced heavy lifting and project cargo transport training, and what does it assume?

Advanced heavy lifting and project cargo transport training suits engineering, transport, rigging, marine, construction, HSE, and assurance functions. It assumes participants can interpret load drawings, equipment data, transport layouts, and method statements.

How does heavy lifting and project cargo transport differ from basic rigging training?

Heavy lifting and project cargo transport integrates engineered load paths, crane and transporter selection, ground and route capacity, marine interfaces, weather criteria, contingencies, and verification. Basic rigging training focuses on routine accessory selection, inspection, signaling, and handling practices.

What defines a critical lift plan?

A critical lift plan records the load, geometry, equipment configuration, capacity checks, ground support, rigging, interfaces, roles, communications, weather limits, hold points, contingencies, and verification evidence required for controlled execution.

How is SPMT transport stability checked?

SPMT transport stability is checked through center-of-gravity location, axle-line configuration, hydraulic grouping, load distribution, platform geometry, support polygon, route gradient, turning effects, ground capacity, equipment limits, and controlled operating criteria.

How are offshore heavy-lift weather limits managed?

Offshore heavy-lift weather limits are managed by defining forecast sources, wind and environmental criteria, operation duration, contingency time, decision points, monitoring responsibilities, stop criteria, and safe-state actions for each marine interface.

Conclusion

Participants take back a Heavy Lift and Transport Execution Plan linking load definition, cranes, rigging, ground support, transport, routes, marine interfaces, weather, and contingencies. It changes separate calculations and method statements into one traceable execution path. The plan supports technical review, site readiness, authorization, toolbox communication, controlled performance, and closeout evidence.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-58 of 58 events

Location	Dates	Duration	Mode	Price
Trabzon	Week 28, 2027 18 – 22 July 2027	1 Week	Onsite	€8,000
London	Week 29, 2027 19 – 23 July 2027	1 Week	Onsite	€6,500
Lagos	Week 29, 2027 25 – 29 July 2027	1 Week	Onsite	€6,000
Istanbul	Week 30, 2027 26 – 30 July 2027	1 Week	Onsite	€6,000
Frankfurt	Week 31, 2027 2 – 6 August 2027	1 Week	Onsite	€6,500
Nice	Week 32, 2027 9 – 13 August 2027	1 Week	Onsite	€8,000
Porto	Week 33, 2027 16 – 20 August 2027	1 Week	Onsite	€6,500
Cape town	Week 33, 2027 22 – 26 August 2027	1 Week	Onsite	€6,000
London	Week 37, 2027 13 – 17 September 2027	1 Week	Onsite	€6,500
San Diego	Week 37, 2027 13 – 17 September 2027	1 Week	Onsite	€16,000
Madrid	Week 38, 2027 20 – 24 September 2027	1 Week	Onsite	€6,500
Amsterdam	Week 41, 2027 11 – 15 October 2027	1 Week	Onsite	€6,500
Zoom	Week 42, 2027 18 – 22 October 2027	1 Week	Online	€3,000
Abu Dhabi	Week 42, 2027 18 – 22 October 2027	1 Week	Onsite	€6,500
Rome	Week 43, 2027 25 – 29 October 2027	1 Week	Onsite	€6,500
Toronto	Week 43, 2027 31 October – 4 November 2027	1 Week	Onsite	€16,000
Prague	Week 45, 2027 8 – 12 November 2027	1 Week	Onsite	€7,500
Seoul	Week 45, 2027 8 – 12 November 2027	1 Week	Onsite	€12,000

Frequently asked questions

What does this course cover?

OverviewAdvanced Heavy Lifting and Project Cargo Transport Training Course is a one-week advanced course for lift and transport engineers, supervisors, rigging planners, project teams, marine operations, HSE personnel, and assurance reviewers who leave with a Heavy Lift and Transport Execution Plan. Participants integrate engineered heavy lifting, critica…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Heavy Lifting and Project Cargo Transport Course