Laboratory General Safety Foundation Training Course

Build practical routines for identifying laboratory hazards, selecting controls, responding to incidents, and improving daily safety.

This 1-week course has 76 dates from November 2026 to November 2027 in 54 cities and live online. The next date runs 23 – 27 November 2026 in Addis Ababa. Fees per participant run from €4,100 (Lagos) to €14,000 (San Diego) in a classroom, and from €1,500 live online.

Laboratory General Safety Foundation Training Course
Duration
1 Week5 days
Next start
Addis Ababa
Scheduled dates
76
Classroom cities
54Addis Ababa, Istanbul, Berlin, Lagos and more
Format
Classroom and live online
Fee per participant
€1,500–€14,000Average €5,750

What does this course cover?

Overview

Laboratory General Safety Foundation Training Course is a one-week course for laboratory supervisors, technicians, researchers, quality personnel, HSE staff, facilities teams, and new laboratory personnel who leave with a Laboratory Safety Action Plan. Participants apply laboratory hazard identification, laboratory risk assessment, chemical and biological safety controls, safe equipment practices, personal protective equipment, waste handling, emergency response, incident reporting, and laboratory safety inspections. Agile Leaders Training Center presents safe laboratory operations through practical control tools.

Who Should Attend

  • Functions responsible for daily laboratory operations and work coordination
  • Teams responsible for testing, research, sampling, and specimen handling
  • Personnel responsible for quality controls, documentation, and corrective actions
  • Functions responsible for occupational safety, facilities, and emergency readiness
  • New laboratory personnel responsible for following safe work procedures

The course assumes participants perform or support routine laboratory work and leaves out specialist containment design, regulatory legal interpretation, and advanced hazardous-material response.

Departments and Industries

The course supports departments and industries that operate laboratories or provide safety, quality, and facilities oversight.

  • Clinical, diagnostic, and public health laboratories
  • Research, education, and product development facilities
  • Manufacturing, food, water, and environmental testing laboratories
  • Quality assurance, occupational safety, and risk functions
  • Engineering, maintenance, facilities, and emergency response teams

Learning Objectives

By the end of this course, participants will be able to:

  • Apply a laboratory hazard identification method
  • Use a laboratory risk assessment matrix to prioritize controls
  • Compare chemical, biological, equipment, and electrical safeguards
  • Build safe labeling, storage, PPE, and waste routines
  • Analyze incidents and inspection findings for corrective action
  • Build a Laboratory Safety Action Plan

Course Agenda

Day 1: Safety Foundations and Risk

  • Laboratory Safety Roles and Responsibility Map
  • Laboratory Hazard Identification Checklist
  • Task-Based Risk Assessment Method
  • Likelihood and Severity Risk Matrix
  • Hierarchy of Controls Selection Guide

Day 2: Chemical and Biological Controls

  • Chemical Inventory and Safety Data Sheet Review
  • Container Labeling and Compatibility Storage Matrix
  • Exposure Route and Containment Assessment
  • Good Microbiological Practice Procedure Checklist
  • Spill Prevention and Decontamination Decision Guide

Day 3: Equipment and Personal Protection

  • Laboratory Equipment Pre-Use Inspection Tool
  • Electrical Safety and Energy Isolation Checklist
  • Personal Protective Equipment Selection Matrix
  • Engineering Control Verification Record
  • Housekeeping and Access Control Walkthrough

Day 4: Waste, Emergencies and Assurance

  • Laboratory Waste Segregation Flowchart
  • Emergency Response and Evacuation Card
  • Incident Notification and Initial Report Form
  • Laboratory Safety Inspection Checklist
  • Corrective Action Ownership Tracker

Day 5: Laboratory Safety Practice

  • Exercise: Complete a Hazard Identification Walkthrough
  • Exercise: Score Risks and Select Controls
  • Exercise: Review Chemical Storage and PPE Decisions
  • Exercise: Respond to a Spill and Report an Incident
  • Capstone Exercise: Laboratory Safety Action Plan

Practical Exercises

The course uses suggested activities from clinical, research, manufacturing, and environmental laboratory settings.

  • Suggested activity: inspect a laboratory scenario and record chemical, biological, equipment, electrical, and housekeeping hazards.
  • Suggested activity: score selected hazards and choose engineering, administrative, and personal protection controls.
  • Suggested activity: evaluate labeling, storage, PPE, waste, and emergency decisions in a simulated work area.
  • Suggested activity: build a Laboratory Safety Action Plan with actions, owners, priorities, and follow-up measures.

FAQs

What is laboratory general safety?

Laboratory general safety is the coordinated use of hazard identification, risk assessment, controls, safe procedures, protective equipment, emergency arrangements, reporting, and inspection to reduce harm during routine laboratory work.

Who suits laboratory general safety training, and what does it assume?

Laboratory general safety training suits personnel who perform or support routine laboratory work and assumes familiarity with their workplace tasks, materials, equipment, and local procedures.

How does laboratory general safety training differ from specialist biosafety training?

Laboratory general safety training covers chemical, biological, equipment, electrical, waste, emergency, and inspection controls; specialist biosafety training concentrates more deeply on biological agents, containment, and microbiological practices.

How is laboratory risk assessment used in daily work?

Laboratory risk assessment identifies task hazards, considers likelihood and severity, checks existing safeguards, prioritizes additional controls, assigns ownership, and records when the assessment needs review.

What should a laboratory safety inspection examine?

A laboratory safety inspection should examine work practices, labeling, storage, equipment condition, engineering controls, PPE, access, housekeeping, waste, emergency readiness, records, and completion of corrective actions.

Conclusion

The course connects laboratory hazard identification, risk assessment, operational controls, emergency readiness, reporting, and assurance. Participants take back a Laboratory Safety Action Plan that sets priorities, responsibilities, controls, and follow-up measures. The plan changes how laboratory teams identify hazards, organize safeguards, respond to incidents, and close inspection findings.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

When and where does this course run?

Showing 1-20 of 76 events
Image Location Dates Duration Mode Price Actions
Addis Ababa Addis Ababa Week 48, 2026
23 – 27 November 2026
1 Week Onsite €4,500
Istanbul Istanbul Week 49, 2026
30 November – 4 December 2026
1 Week Onsite €4,500
Berlin Berlin Week 49, 2026
30 November – 4 December 2026
1 Week Onsite €5,700
Lagos Lagos Week 49, 2026
6 – 10 December 2026
1 Week Onsite €4,100
Barcelona Barcelona Week 50, 2026
7 – 11 December 2026
1 Week Onsite €5,700
Abu Dhabi Abu Dhabi Week 51, 2026
14 – 18 December 2026
1 Week Onsite €4,700
Madrid Madrid Week 53, 2026
28 December 2026 – 1 January 2027
1 Week Onsite €5,700
Manama Manama Week 53, 2027
3 – 7 January 2027
1 Week Onsite €4,700
Singapore Singapore Week 02, 2027
11 – 15 January 2027
1 Week Onsite €5,700
Johannesburg Johannesburg Week 02, 2027
17 – 21 January 2027
1 Week Onsite €4,500
Cape town Cape town Week 03, 2027
24 – 28 January 2027
1 Week Onsite €4,500
Paris Paris Week 04, 2027
25 – 29 January 2027
1 Week Onsite €5,700
Amsterdam Amsterdam Week 05, 2027
1 – 5 February 2027
1 Week Onsite €5,700
London London Week 06, 2027
8 – 12 February 2027
1 Week Onsite €5,700
Milan Milan Week 06, 2027
8 – 12 February 2027
1 Week Onsite €5,700
Dubai Dubai Week 07, 2027
15 – 19 February 2027
1 Week Onsite €4,500
Amman Amman Week 07, 2027
21 – 25 February 2027
1 Week Onsite €4,100
Istanbul Istanbul Week 09, 2027
1 – 5 March 2027
1 Week Onsite €4,500
Abu Dhabi Abu Dhabi Week 09, 2027
1 – 5 March 2027
1 Week Onsite €4,700
Sharm El-Sheikh Sharm El-Sheikh Week 10, 2027
8 – 12 March 2027
1 Week Onsite €4,100

Frequently asked questions

When does this course next run?

The next date runs 23 – 27 November 2026 in Addis Ababa. It is one of 76 dates scheduled up to November 2027.

Where is this course held?

In a classroom in 54 cities: Addis Ababa, Istanbul, Berlin, Lagos, Barcelona, Abu Dhabi, Madrid, Manama, and more. It is also scheduled as live online sessions.

Can I attend this course online?

Yes. One date is scheduled as a live online session: 2 – 6 August 2027, from €1,500 per participant.

How long is the course?

1 Week. Each date shows its start and end dates.

How much does the course cost?

Fees per participant run from €4,100 (Lagos) to €14,000 (San Diego) in a classroom, and from €1,500 live online. Each date shows its own fee.

What does this course cover?

OverviewLaboratory General Safety Foundation Training Course is a one-week course for laboratory supervisors, technicians, researchers, quality personnel, HSE staff, facilities teams, and new laboratory personnel who leave with a Laboratory Safety Action Plan. Participants apply laboratory hazard identification, laboratory risk assessment, chemical and bi…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Can this course be run for our team?

Yes. Tell us the number of participants and your preferred dates and city through our training request form.

This course by city

Agile Leaders Training Center