Laboratory General Safety Foundation Training Course

Name: Laboratory General Safety Foundation Training Course
Availability: InStock

Build practical routines for identifying laboratory hazards, selecting controls, responding to incidents, and improving daily safety.

At a glance

Duration: 1 Week
Format: Classroom
Cities: London, Lisbon, Cairo, Prague, Nice, Istanbul and more
Next session: 2 – 6 November 2026, London
Average fee: 5,750 €

Home
Our Categories
Laboratory General Safety Foundation Training Course

Download Brochure (PDF) Print PDF

Overview

Laboratory General Safety Foundation Training Course is a one-week course for laboratory supervisors, technicians, researchers, quality personnel, HSE staff, facilities teams, and new laboratory personnel who leave with a Laboratory Safety Action Plan. Participants apply laboratory hazard identification, laboratory risk assessment, chemical and biological safety controls, safe equipment practices, personal protective equipment, waste handling, emergency response, incident reporting, and laboratory safety inspections. Agile Leaders Training Center presents safe laboratory operations through practical control tools.

Who Should Attend

Functions responsible for daily laboratory operations and work coordination
Teams responsible for testing, research, sampling, and specimen handling
Personnel responsible for quality controls, documentation, and corrective actions
Functions responsible for occupational safety, facilities, and emergency readiness
New laboratory personnel responsible for following safe work procedures

The course assumes participants perform or support routine laboratory work and leaves out specialist containment design, regulatory legal interpretation, and advanced hazardous-material response.

Departments and Industries

The course supports departments and industries that operate laboratories or provide safety, quality, and facilities oversight.

Clinical, diagnostic, and public health laboratories
Research, education, and product development facilities
Manufacturing, food, water, and environmental testing laboratories
Quality assurance, occupational safety, and risk functions
Engineering, maintenance, facilities, and emergency response teams

Learning Objectives

By the end of this course, participants will be able to:

Apply a laboratory hazard identification method
Use a laboratory risk assessment matrix to prioritize controls
Compare chemical, biological, equipment, and electrical safeguards
Build safe labeling, storage, PPE, and waste routines
Analyze incidents and inspection findings for corrective action
Build a Laboratory Safety Action Plan

Course Agenda

Day 1: Safety Foundations and Risk

Laboratory Safety Roles and Responsibility Map
Laboratory Hazard Identification Checklist
Task-Based Risk Assessment Method
Likelihood and Severity Risk Matrix
Hierarchy of Controls Selection Guide

Day 2: Chemical and Biological Controls

Chemical Inventory and Safety Data Sheet Review
Container Labeling and Compatibility Storage Matrix
Exposure Route and Containment Assessment
Good Microbiological Practice Procedure Checklist
Spill Prevention and Decontamination Decision Guide

Day 3: Equipment and Personal Protection

Laboratory Equipment Pre-Use Inspection Tool
Electrical Safety and Energy Isolation Checklist
Personal Protective Equipment Selection Matrix
Engineering Control Verification Record
Housekeeping and Access Control Walkthrough

Day 4: Waste, Emergencies and Assurance

Laboratory Waste Segregation Flowchart
Emergency Response and Evacuation Card
Incident Notification and Initial Report Form
Laboratory Safety Inspection Checklist
Corrective Action Ownership Tracker

Day 5: Laboratory Safety Practice

Exercise: Complete a Hazard Identification Walkthrough
Exercise: Score Risks and Select Controls
Exercise: Review Chemical Storage and PPE Decisions
Exercise: Respond to a Spill and Report an Incident
Capstone Exercise: Laboratory Safety Action Plan

Practical Exercises

The course uses suggested activities from clinical, research, manufacturing, and environmental laboratory settings.

Suggested activity: inspect a laboratory scenario and record chemical, biological, equipment, electrical, and housekeeping hazards.
Suggested activity: score selected hazards and choose engineering, administrative, and personal protection controls.
Suggested activity: evaluate labeling, storage, PPE, waste, and emergency decisions in a simulated work area.
Suggested activity: build a Laboratory Safety Action Plan with actions, owners, priorities, and follow-up measures.

FAQs

What is laboratory general safety?

Laboratory general safety is the coordinated use of hazard identification, risk assessment, controls, safe procedures, protective equipment, emergency arrangements, reporting, and inspection to reduce harm during routine laboratory work.

Who suits laboratory general safety training, and what does it assume?

Laboratory general safety training suits personnel who perform or support routine laboratory work and assumes familiarity with their workplace tasks, materials, equipment, and local procedures.

How does laboratory general safety training differ from specialist biosafety training?

Laboratory general safety training covers chemical, biological, equipment, electrical, waste, emergency, and inspection controls; specialist biosafety training concentrates more deeply on biological agents, containment, and microbiological practices.

How is laboratory risk assessment used in daily work?

Laboratory risk assessment identifies task hazards, considers likelihood and severity, checks existing safeguards, prioritizes additional controls, assigns ownership, and records when the assessment needs review.

What should a laboratory safety inspection examine?

A laboratory safety inspection should examine work practices, labeling, storage, equipment condition, engineering controls, PPE, access, housekeeping, waste, emergency readiness, records, and completion of corrective actions.

Conclusion

The course connects laboratory hazard identification, risk assessment, operational controls, emergency readiness, reporting, and assurance. Participants take back a Laboratory Safety Action Plan that sets priorities, responsibilities, controls, and follow-up measures. The plan changes how laboratory teams identify hazards, organize safeguards, respond to incidents, and close inspection findings.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-60 of 75 events

Location	Dates	Duration	Mode	Price
Rome	Week 22, 2027 31 May – 4 June 2027	1 Week	Onsite	€5,700
Zanzibar	Week 22, 2027 6 – 10 June 2027	1 Week	Onsite	€5,500
Amsterdam	Week 23, 2027 7 – 11 June 2027	1 Week	Onsite	€5,700
Athens	Week 24, 2027 14 – 18 June 2027	1 Week	Onsite	€6,700
London	Week 25, 2027 21 – 25 June 2027	1 Week	Onsite	€5,700
Seoul	Week 25, 2027 21 – 25 June 2027	1 Week	Onsite	€10,000
Munich	Week 26, 2027 28 June – 2 July 2027	1 Week	Onsite	€5,700
Manama	Week 26, 2027 4 – 8 July 2027	1 Week	Onsite	€4,700
Kuwait	Week 27, 2027 11 – 15 July 2027	1 Week	Onsite	€5,500
Abu Dhabi	Week 29, 2027 19 – 23 July 2027	1 Week	Onsite	€4,700
Frankfurt	Week 30, 2027 26 – 30 July 2027	1 Week	Onsite	€5,700
Zoom	Week 31, 2027 2 – 6 August 2027	1 Week	Online	€1,500
Milan	Week 31, 2027 2 – 6 August 2027	1 Week	Onsite	€5,700
Geneva	Week 31, 2027 8 – 12 August 2027	1 Week	Onsite	€6,200
Dubai	Week 32, 2027 9 – 13 August 2027	1 Week	Onsite	€4,500
Baku	Week 33, 2027 16 – 20 August 2027	1 Week	Onsite	€5,000
Chicago	Week 33, 2027 22 – 26 August 2027	1 Week	Onsite	€12,000
Rome	Week 34, 2027 23 – 27 August 2027	1 Week	Onsite	€5,700
Barcelona	Week 35, 2027 30 August – 3 September 2027	1 Week	Onsite	€5,700
San Diego	Week 35, 2027 30 August – 3 September 2027	1 Week	Onsite	€14,000

Frequently asked questions

What does this course cover?

OverviewLaboratory General Safety Foundation Training Course is a one-week course for laboratory supervisors, technicians, researchers, quality personnel, HSE staff, facilities teams, and new laboratory personnel who leave with a Laboratory Safety Action Plan. Participants apply laboratory hazard identification, laboratory risk assessment, chemical and bi…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Laboratory General Safety Foundation Training Course