Laboratory General Safety Foundation Training Course

Name: Laboratory General Safety Foundation Training Course
Availability: InStock

Build practical routines for identifying laboratory hazards, selecting controls, responding to incidents, and improving daily safety.

At a glance

Duration: 1 Week
Format: Classroom
Cities: London, Lisbon, Cairo, Prague, Nice, Istanbul and more
Next session: 2 – 6 November 2026, London
Average fee: 5,750 €

Home
Our Categories
Laboratory General Safety Foundation Training Course

Download Brochure (PDF) Print PDF

Overview

Laboratory General Safety Foundation Training Course is a one-week course for laboratory supervisors, technicians, researchers, quality personnel, HSE staff, facilities teams, and new laboratory personnel who leave with a Laboratory Safety Action Plan. Participants apply laboratory hazard identification, laboratory risk assessment, chemical and biological safety controls, safe equipment practices, personal protective equipment, waste handling, emergency response, incident reporting, and laboratory safety inspections. Agile Leaders Training Center presents safe laboratory operations through practical control tools.

Who Should Attend

Functions responsible for daily laboratory operations and work coordination
Teams responsible for testing, research, sampling, and specimen handling
Personnel responsible for quality controls, documentation, and corrective actions
Functions responsible for occupational safety, facilities, and emergency readiness
New laboratory personnel responsible for following safe work procedures

The course assumes participants perform or support routine laboratory work and leaves out specialist containment design, regulatory legal interpretation, and advanced hazardous-material response.

Departments and Industries

The course supports departments and industries that operate laboratories or provide safety, quality, and facilities oversight.

Clinical, diagnostic, and public health laboratories
Research, education, and product development facilities
Manufacturing, food, water, and environmental testing laboratories
Quality assurance, occupational safety, and risk functions
Engineering, maintenance, facilities, and emergency response teams

Learning Objectives

By the end of this course, participants will be able to:

Apply a laboratory hazard identification method
Use a laboratory risk assessment matrix to prioritize controls
Compare chemical, biological, equipment, and electrical safeguards
Build safe labeling, storage, PPE, and waste routines
Analyze incidents and inspection findings for corrective action
Build a Laboratory Safety Action Plan

Course Agenda

Day 1: Safety Foundations and Risk

Laboratory Safety Roles and Responsibility Map
Laboratory Hazard Identification Checklist
Task-Based Risk Assessment Method
Likelihood and Severity Risk Matrix
Hierarchy of Controls Selection Guide

Day 2: Chemical and Biological Controls

Chemical Inventory and Safety Data Sheet Review
Container Labeling and Compatibility Storage Matrix
Exposure Route and Containment Assessment
Good Microbiological Practice Procedure Checklist
Spill Prevention and Decontamination Decision Guide

Day 3: Equipment and Personal Protection

Laboratory Equipment Pre-Use Inspection Tool
Electrical Safety and Energy Isolation Checklist
Personal Protective Equipment Selection Matrix
Engineering Control Verification Record
Housekeeping and Access Control Walkthrough

Day 4: Waste, Emergencies and Assurance

Laboratory Waste Segregation Flowchart
Emergency Response and Evacuation Card
Incident Notification and Initial Report Form
Laboratory Safety Inspection Checklist
Corrective Action Ownership Tracker

Day 5: Laboratory Safety Practice

Exercise: Complete a Hazard Identification Walkthrough
Exercise: Score Risks and Select Controls
Exercise: Review Chemical Storage and PPE Decisions
Exercise: Respond to a Spill and Report an Incident
Capstone Exercise: Laboratory Safety Action Plan

Practical Exercises

The course uses suggested activities from clinical, research, manufacturing, and environmental laboratory settings.

Suggested activity: inspect a laboratory scenario and record chemical, biological, equipment, electrical, and housekeeping hazards.
Suggested activity: score selected hazards and choose engineering, administrative, and personal protection controls.
Suggested activity: evaluate labeling, storage, PPE, waste, and emergency decisions in a simulated work area.
Suggested activity: build a Laboratory Safety Action Plan with actions, owners, priorities, and follow-up measures.

FAQs

What is laboratory general safety?

Laboratory general safety is the coordinated use of hazard identification, risk assessment, controls, safe procedures, protective equipment, emergency arrangements, reporting, and inspection to reduce harm during routine laboratory work.

Who suits laboratory general safety training, and what does it assume?

Laboratory general safety training suits personnel who perform or support routine laboratory work and assumes familiarity with their workplace tasks, materials, equipment, and local procedures.

How does laboratory general safety training differ from specialist biosafety training?

Laboratory general safety training covers chemical, biological, equipment, electrical, waste, emergency, and inspection controls; specialist biosafety training concentrates more deeply on biological agents, containment, and microbiological practices.

How is laboratory risk assessment used in daily work?

Laboratory risk assessment identifies task hazards, considers likelihood and severity, checks existing safeguards, prioritizes additional controls, assigns ownership, and records when the assessment needs review.

What should a laboratory safety inspection examine?

A laboratory safety inspection should examine work practices, labeling, storage, equipment condition, engineering controls, PPE, access, housekeeping, waste, emergency readiness, records, and completion of corrective actions.

Conclusion

The course connects laboratory hazard identification, risk assessment, operational controls, emergency readiness, reporting, and assurance. Participants take back a Laboratory Safety Action Plan that sets priorities, responsibilities, controls, and follow-up measures. The plan changes how laboratory teams identify hazards, organize safeguards, respond to incidents, and close inspection findings.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 75 events

Location	Dates	Duration	Mode	Price
London	Week 45, 2026 2 – 6 November 2026	1 Week	Onsite	€5,700
Lisbon	Week 45, 2026 2 – 6 November 2026	1 Week	Onsite	€5,700
Cairo	Week 46, 2026 9 – 13 November 2026	1 Week	Onsite	€4,100
Prague	Week 46, 2026 9 – 13 November 2026	1 Week	Onsite	€6,000
Nice	Week 47, 2026 16 – 20 November 2026	1 Week	Onsite	€5,700
Istanbul	Week 49, 2026 30 November – 4 December 2026	1 Week	Onsite	€4,500
Berlin	Week 49, 2026 30 November – 4 December 2026	1 Week	Onsite	€5,700
Lagos	Week 49, 2026 6 – 10 December 2026	1 Week	Onsite	€4,100
Barcelona	Week 50, 2026 7 – 11 December 2026	1 Week	Onsite	€5,700
Abu Dhabi	Week 51, 2026 14 – 18 December 2026	1 Week	Onsite	€4,700
Madrid	Week 53, 2026 28 December 2026 – 1 January 2027	1 Week	Onsite	€5,700
Manama	Week 53, 2027 3 – 7 January 2027	1 Week	Onsite	€4,700
Singapore	Week 02, 2027 11 – 15 January 2027	1 Week	Onsite	€5,700
Johannesburg	Week 02, 2027 17 – 21 January 2027	1 Week	Onsite	€4,500
Cape town	Week 03, 2027 24 – 28 January 2027	1 Week	Onsite	€4,500
Paris	Week 04, 2027 25 – 29 January 2027	1 Week	Onsite	€5,700
Amsterdam	Week 05, 2027 1 – 5 February 2027	1 Week	Onsite	€5,700
London	Week 06, 2027 8 – 12 February 2027	1 Week	Onsite	€5,700
Milan	Week 06, 2027 8 – 12 February 2027	1 Week	Onsite	€5,700
Dubai	Week 07, 2027 15 – 19 February 2027	1 Week	Onsite	€4,500

Frequently asked questions

What does this course cover?

OverviewLaboratory General Safety Foundation Training Course is a one-week course for laboratory supervisors, technicians, researchers, quality personnel, HSE staff, facilities teams, and new laboratory personnel who leave with a Laboratory Safety Action Plan. Participants apply laboratory hazard identification, laboratory risk assessment, chemical and bi…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Laboratory General Safety Foundation Training Course