Oil and Gas Firefighting Systems Design Course

Name: Oil and Gas Firefighting Systems Design Review Training Course
Availability: InStock

Engineer and review firewater, water-spray, deluge, foam, and special-hazard systems through calculations, drawings, specifications, and test evidence.

Oil and Gas Firefighting Systems Design Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Vienna, Toronto, Prague, Milan, Langkawi, Cape town and more
Next session: 9 – 13 November 2026, Vienna
Average fee: 7,500 €

Home
Our Categories
Oil and Gas Firefighting Systems Design Review Training Course

Download Brochure (PDF) Print PDF

Overview

Oil and Gas Firefighting Systems Design Review Training Course is a one-week advanced course for fire protection, process safety, mechanical, piping, facilities, project, operations, and assurance functions who leave with a Firefighting System Design Review File. Participants connect hazard scenarios, firewater demand, hydraulic design, pumps, storage, networks, fixed suppression, detection interfaces, passive protection, reliability, testing, drawings, and specifications. Agile Leaders Training Center presents oil and gas firefighting systems design review.

Who Should Attend

Fire-protection functions responsible for design basis, system selection, sizing, and technical review
Process-safety functions responsible for credible scenarios, escalation, consequence controls, and performance requirements
Mechanical and piping functions responsible for pumps, tanks, networks, valves, monitors, and equipment specifications
Facilities and project functions responsible for layout, interfaces, constructability, procurement, and design assurance
Operations and maintenance functions responsible for accessibility, reliability, testing, impairment, and lifecycle evidence
Technical-assurance functions responsible for calculations, drawings, deviations, comments, and approval recommendations

The course assumes participants already read engineering drawings and contribute to process-facility design or review, and it leaves out workplace fire induction, evacuation management, fire-warden duties, extinguisher operation, and emergency-command tactics.

Departments and Industries

The course supports departments and industries that engineer fixed fire-protection systems for process hazards.

Oil and gas production, processing, refining, storage, and terminals
Petrochemical, chemical, and bulk flammable-liquid facilities
Fire protection, process safety, mechanical, and piping engineering
Projects, engineering procurement, construction, and technical assurance
Operations, maintenance, inspection, and reliability
Power, utilities, marine facilities, and industrial infrastructure

Learning Objectives

By the end of this course, participants will be able to:

Build a hazard-led firefighting system design basis
Analyze firewater demand, storage, pumping, and network hydraulics
Evaluate water-spray, deluge, foam, and special-hazard systems
Compare detection, release, passive-protection, and layout interfaces
Diagnose calculation, drawing, specification, reliability, and testing gaps
Create a traceable fixed-system design review recommendation

Course Agenda

Day 1: Define the Fire Protection Basis

Fire and Explosion Scenario Selection Matrix
Escalation, Exposure, and Protection Objective Map
Active and Passive Protection Allocation Register
Design-Basis Assumption and Deviation Log
Firefighting System Performance Requirement Sheet

Day 2: Engineer Firewater Supply

Simultaneous Firewater Demand Calculation Method
NFPA 22 Fire-Water Storage Sizing Review
NFPA 20 Fire-Pump Duty and Arrangement Checklist
NFPA 24 Ring-Main, Hydrant, and Monitor Layout Review
Hydraulic Network Pressure and Flow Verification Model

Day 3: Design Fixed Suppression

NFPA 15 Water-Spray Coverage and Nozzle Calculation
Deluge Valve-Zone and Release Logic Diagram
NFPA 16 Foam-Water Application and Proportioning Review
Tank, Process-Area, and Loading-Facility Protection Matrix
Dry-Chemical and Clean-Agent Selection Assessment

Day 4: Review Interfaces and Assurance

Fire and Gas Detection-to-Release Cause-and-Effect Review
Passive Fire Protection and Drainage Interface Checklist
Equipment Access, Isolation, and Maintainability Layout Audit
NFPA 25 Inspection, Testing, and Maintenance Basis
Calculation, Drawing, Specification, and Comment Resolution Register

Day 5: Practice Design Review

Suggested Exercise: Challenge Hazard Scenarios and Protection Objectives
Suggested Exercise: Verify Firewater Demand, Pump Duty, and Network Pressure
Suggested Exercise: Review Water-Spray, Deluge, and Foam Coverage
Suggested Exercise: Resolve Interface, Reliability, and Testing Deviations
Capstone Exercise: Complete the Firefighting System Design Review File

Practical Exercises

The course uses suggested activities to connect hazard evidence, hydraulic calculations, system selection, design documentation, and assurance decisions.

Suggested activity: define credible process, storage, and loading scenarios and translate them into protection objectives and demand cases.
Suggested activity: check storage, pump duty, ring-main hydraulics, residual pressure, hydrant placement, and monitor reach.
Suggested activity: review water-spray density, deluge zoning, foam application, release logic, drainage, and passive-protection interfaces.
Suggested activity: consolidate calculation, drawing, specification, testing, and deviation findings into an approval recommendation.

FAQs

Who suits oil and gas firefighting systems design training, and what does it assume?

Oil and gas firefighting systems design training suits fire protection, process safety, mechanical, piping, facilities, project, operations, and assurance functions. It assumes participants can read engineering drawings and work with process-facility design information.

How does firefighting systems design differ from workplace fire-safety training?

Firefighting systems design converts hazard scenarios into engineered water supply, hydraulic networks, fixed suppression, detection interfaces, drawings, specifications, and tests. Workplace fire-safety training focuses on prevention behavior, alarms, evacuation, wardens, and portable extinguishers.

How is firewater demand established for oil and gas facilities?

Firewater demand is established from credible simultaneous scenarios, exposure protection, system application rates, hose and monitor allowances, duration, redundancy, hydraulic limits, and the governing project design basis.

What should a fixed firefighting system design review test?

A fixed firefighting system design review should test scenario coverage, demand calculations, pump and storage capacity, hydraulic performance, equipment layout, suppression application, release interfaces, drainage, reliability, accessibility, testing provisions, drawings, and specifications.

How do detection and release interfaces affect fixed suppression systems?

Detection and release interfaces affect initiation logic, voting, alarms, shutdowns, deluge or agent release, manual override, fail-safe behavior, feedback, testing, and the cause-and-effect evidence used during design assurance.

Conclusion

Participants take back a Firefighting System Design Review File linking hazards, demand, hydraulics, fixed suppression, interfaces, passive protection, reliability, testing, calculations, drawings, specifications, and deviations. The file changes separate discipline documents into one traceable assurance record. It supports design comments, verification decisions, action closure, and approval recommendations.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 58 events

Location	Dates	Duration	Mode	Price
Vienna	Week 46, 2026 9 – 13 November 2026	1 Week	Onsite	€7,500
Toronto	Week 47, 2026 22 – 26 November 2026	1 Week	Onsite	€16,000
Prague	Week 48, 2026 23 – 27 November 2026	1 Week	Onsite	€7,500
Milan	Week 49, 2026 30 November – 4 December 2026	1 Week	Onsite	€7,000
Langkawi	Week 49, 2026 6 – 10 December 2026	1 Week	Onsite	€8,000
Cape town	Week 50, 2026 13 – 17 December 2026	1 Week	Onsite	€6,000
Amman	Week 51, 2026 20 – 24 December 2026	1 Week	Onsite	€6,000
London	Week 53, 2026 28 December 2026 – 1 January 2027	1 Week	Onsite	€6,500
Nairobi	Week 53, 2027 3 – 7 January 2027	1 Week	Onsite	€6,000
Tbilisi	Week 02, 2027 11 – 15 January 2027	1 Week	Onsite	€5,700
Montreux	Week 03, 2027 18 – 22 January 2027	1 Week	Onsite	€8,000
Sharm El-Sheikh	Week 04, 2027 25 – 29 January 2027	1 Week	Onsite	€5,200
New York	Week 05, 2027 1 – 5 February 2027	1 Week	Onsite	€16,000
Zoom	Week 06, 2027 8 – 12 February 2027	1 Week	Online	€3,000
Singapore	Week 06, 2027 8 – 12 February 2027	1 Week	Onsite	€6,500
Chicago	Week 06, 2027 14 – 18 February 2027	1 Week	Onsite	€16,000
Doha	Week 07, 2027 21 – 25 February 2027	1 Week	Onsite	€7,000
Abu Dhabi	Week 08, 2027 22 – 26 February 2027	1 Week	Onsite	€6,500
Dubai	Week 09, 2027 1 – 5 March 2027	1 Week	Onsite	€6,500
Bali	Week 09, 2027 7 – 11 March 2027	1 Week	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewOil and Gas Firefighting Systems Design Review Training Course is a one-week advanced course for fire protection, process safety, mechanical, piping, facilities, project, operations, and assurance functions who leave with a Firefighting System Design Review File. Participants connect hazard scenarios, firewater demand, hydraulic design, pumps, sto…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Oil and Gas Firefighting Systems Design Course