Road Materials and Construction Technology Course

Name: Road Materials and Construction Technology Course
Availability: InStock

Connect road-material selection, production, placement, testing, compaction, and acceptance in one construction control plan.

At a glance

Duration: 5 days
Format: Classroom
Cities: Nairobi, Casablanca, Istanbul, Phuket, Paris, Cairo and more
Next session: 11 – 15 October 2026, Nairobi
Average fee: 7,550 €

Home
Our Categories
Road Materials and Construction Technology Course

Download Brochure (PDF) Print PDF

Overview

Road Materials and Construction Technology Course is a five-day intermediate course for highway, civil, materials, laboratory, supervision, inspection, contracting, consulting, quality, and project teams who leave with a Road Materials and Construction Control Plan. Participants connect subgrade, aggregates, binders, asphalt, unbound and treated layers, concrete, geosynthetics, recycling, stabilization, sampling, testing, production, placement, compaction, and acceptance. The course turns material data into controlled field decisions. Agile Leaders Training Center presents road construction technology through traceable materials and process control.

Who Should Attend

Teams responsible for selecting and specifying road construction materials
Functions producing, sampling, testing, and accepting pavement materials
Personnel supervising earthworks, layers, asphalt, concrete, and geosynthetics
Groups controlling compaction, temperature, moisture, workmanship, and defects
Leaders coordinating laboratories, plants, contractors, consultants, and quality records

The course assumes participants can interpret road drawings, material specifications, test reports, quantities, and work procedures, and it leaves out geometric highway design, detailed pavement structural design, and laboratory accreditation.

Departments and Industries

The course supports departments and industries responsible for road-material selection and construction quality.

Highway engineering, civil works, materials, laboratories, and quality
Construction supervision, inspection, project controls, and contracting
Roads, airports, industrial sites, logistics facilities, and property developments
Aggregate, asphalt, concrete, binder, geosynthetic, and recycling supply
Consulting, testing, production, placement, and technical services

Learning Objectives

By the end of this course, participants will be able to:

Compare subgrade, aggregate, binder, asphalt, concrete, and geosynthetic options
Apply sampling, testing, production, placement, and compaction controls
Analyze moisture, temperature, density, gradation, and mixture evidence
Evaluate stabilization, recycling, and sustainability trade-offs
Diagnose construction defects and define corrective actions
Build a Road Materials and Construction Control Plan

Course Agenda

Day 1: Ground and Layer Materials

Subgrade Classification and Suitability Matrix
Earthwork Moisture and Compaction Control Sheet
Aggregate Source and Property Evaluation
Base and Subbase Gradation Review
Geosynthetic Function and Selection Guide

Day 2: Asphalt and Concrete Materials

Asphalt Binder Property and Selection Matrix
Asphalt Mixture Component and Volumetric Review
Moisture Susceptibility and Durability Evidence
Paving Concrete Material and Joint Checklist
Material Storage, Handling, and Traceability Plan

Day 3: Production and Placement Technology

Plant Production and Calibration Control
Hauling, Segregation, and Temperature Management
Layer Preparation and Tack Application Checklist
Paver Operation and Mat Quality Control
Roller Pattern and Density Achievement Plan

Day 4: Testing, Acceptance, and Improvement

Material Sampling and Sample Security Protocol
Field and Laboratory Test Schedule
Quality Lot and Acceptance Decision Matrix
Defect Cause and Corrective Action Register
Recycling, Stabilization, and Resource Trade-Off Review

Day 5: Road Materials Control Practice

Exercise: Evaluate Subgrade, Aggregate, and Geosynthetic Options
Exercise: Review Asphalt and Concrete Material Evidence
Exercise: Control Production, Placement, and Compaction
Exercise: Make an Acceptance and Corrective Action Decision
Capstone Exercise: Road Materials and Construction Control Plan

Practical Exercises

The course uses suggested activities to connect material characteristics with production, field execution, and acceptance decisions.

Suggested activity: compare subgrade, aggregate, stabilized-layer, and geosynthetic options against service and construction requirements.
Suggested activity: review binder, mixture, concrete, moisture, density, gradation, and temperature evidence for a pavement section.
Suggested activity: map plant, hauling, placement, compaction, sampling, testing, and traceability controls for a work package.
Suggested activity: integrate materials, technologies, acceptance criteria, defects, corrective actions, and sustainability choices in a Road Materials and Construction Control Plan.

FAQs

Who suits the road materials and construction technology course and what does it assume?

It suits teams selecting, producing, testing, placing, inspecting, or accepting road materials and assumes they can interpret drawings, specifications, test reports, quantities, and construction procedures.

How does road materials training differ from pavement design training?

Road materials training focuses on material behavior, production, placement, testing, and acceptance, while pavement design training determines structural layer thicknesses and performance for traffic, climate, and ground conditions.

How are road construction materials accepted?

Road construction materials are accepted through approved sources, traceability, representative sampling, specified tests, process records, field measurements, lot evaluation, workmanship inspection, and documented disposition of nonconforming results.

Why are temperature moisture and compaction controlled in roadwork?

Temperature, moisture, and compaction are controlled because they influence workability, density, bonding, strength, permeability, uniformity, and the likelihood of early construction defects.

What belongs in a road materials control plan?

A road materials control plan records sources, properties, approvals, sampling, tests, production limits, placement methods, compaction, traceability, acceptance rules, defect responses, responsibilities, and quality records.

Conclusion

Participants take back a Road Materials and Construction Control Plan linking material selection, tests, production, placement, compaction, acceptance, defects, recycling, and stabilization. It changes disconnected laboratory and field data into traceable quality decisions. The plan supports controlled road construction without replacing detailed pavement design, project specifications, or authorized laboratory procedures.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-56 of 56 events

Location	Dates	Duration	Mode	Price
Bangkok	Week 26, 2027 4 – 8 July 2027	5 Days	Onsite	€8,000
San Diego	Week 28, 2027 12 – 16 July 2027	5 Days	Onsite	€16,000
Langkawi	Week 28, 2027 18 – 22 July 2027	5 Days	Onsite	€8,000
Tokyo	Week 30, 2027 26 – 30 July 2027	5 Days	Onsite	€12,000
Kuala Lumpur	Week 31, 2027 2 – 6 August 2027	5 Days	Onsite	€6,500
Marbella	Week 31, 2027 8 – 12 August 2027	5 Days	Onsite	€6,500
Accra	Week 32, 2027 15 – 19 August 2027	5 Days	Onsite	€6,000
Chicago	Week 33, 2027 22 – 26 August 2027	5 Days	Onsite	€16,000
Porto	Week 34, 2027 23 – 27 August 2027	5 Days	Onsite	€6,500
Jakarta	Week 35, 2027 30 August – 3 September 2027	5 Days	Onsite	€8,000
Zoom	Week 36, 2027 6 – 10 September 2027	5 Days	Online	€3,000
Zanzibar	Week 36, 2027 12 – 16 September 2027	5 Days	Onsite	€6,000
Manama	Week 37, 2027 19 – 23 September 2027	5 Days	Onsite	€6,500
Bali	Week 38, 2027 26 – 30 September 2027	5 Days	Onsite	€6,500
New York	Week 40, 2027 4 – 8 October 2027	5 Days	Onsite	€16,000
Madrid	Week 41, 2027 11 – 15 October 2027	5 Days	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewRoad Materials and Construction Technology Course is a five-day intermediate course for highway, civil, materials, laboratory, supervision, inspection, contracting, consulting, quality, and project teams who leave with a Road Materials and Construction Control Plan. Participants connect subgrade, aggregates, binders, asphalt, unbound and treated l…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Road Materials and Construction Technology Course