Stormwater Drainage Study and Design Course

Name: Stormwater Drainage Study and Design Course
Availability: InStock

Connect rainfall-runoff analysis, conveyance sizing, storage routing, flood pathways, modeling, and drawings.

At a glance

Duration: 5 days
Format: Classroom
Cities: Istanbul, Nairobi, Muscat, Milan, Accra, Chicago and more
Next session: 12 – 16 October 2026, Istanbul
Average fee: 7,550 €

Home
Our Categories
Stormwater Drainage Study and Design Course

Overview

Stormwater Drainage Study and Design Course is a five-day intermediate course for civil and drainage engineers, infrastructure planners, reviewers, consultants, project engineers, and technical-office teams who leave with a Stormwater Drainage Design Package. Participants connect catchment delineation, rainfall data, design storms, runoff estimation, conveyance sizing, open channels, storage routing, outfalls, flood pathways, water quality, modeling assumptions, checks, and drawings. The course turns disconnected calculations into a reviewable drainage basis. Agile Leaders Training Center presents stormwater drainage study and design through practical engineering artifacts.

Who Should Attend

Teams responsible for catchment studies, rainfall criteria, runoff estimates, and drainage planning
Functions sizing inlets, pipes, manholes, culverts, channels, and outfalls
Personnel modeling hydrologic and hydraulic performance and documenting assumptions
Groups coordinating drainage networks with roads, utilities, sites, flood routes, and receiving systems
Reviewers responsible for calculations, drawings, design checks, and technical comments

The course assumes participants can use engineering calculations and interpret survey information and drawings, and it leaves out introductory fluid mechanics, software instruction, field surveying, and jurisdiction-specific approvals.

Departments and Industries

The course supports departments and industries responsible for stormwater studies, drainage infrastructure, flood coordination, and design assurance.

Civil engineering, drainage, hydrology, hydraulics, and infrastructure planning
Roads, transport, municipal works, utilities, and land development
Industrial sites, energy facilities, logistics areas, and commercial developments
Environmental, water-quality, resilience, and flood-risk functions
Engineering consultancy, project delivery, technical offices, and design review

Learning Objectives

By the end of this course, participants will be able to:

Analyze catchments, rainfall sources, design storms, and runoff characteristics
Apply hydrologic methods and build peak-flow and hydrograph calculations
Evaluate inlet, pipe, culvert, open-channel, and outfall capacity
Use detention, retention, routing, and overflow criteria
Diagnose model assumptions, flood interactions, water-quality controls, and design risks
Develop a Stormwater Drainage Design Package

Course Agenda

Day 1: Catchments and Rainfall Basis

Catchment Delineation and Flow-Path Map
Land-Cover and Imperviousness Schedule
Rainfall Data Source and Quality Register
Design-Storm Selection Decision Matrix
Drainage Design Criteria and Assumption Log

Day 2: Runoff and Hydrologic Analysis

Rational Method Peak-Flow Worksheet
Time-of-Concentration Component Check
Loss, Infiltration, and Runoff Parameter Table
Design Hydrograph Development Method
Hydrologic Sensitivity and Calibration Review

Day 3: Conveyance and Surface Drainage

Inlet Capture and Bypass-Flow Calculation
Pipe and Manhole Capacity Schedule
Culvert Flow-Control and Headwater Check
Open-Channel Geometry and Manning Review
Outfall Tailwater and Erosion-Control Assessment

Day 4: Storage, Modeling, and Flood Coordination

Detention and Retention Storage Sizing Method
Level-Pool Routing and Outlet-Control Table
SWMM Network Model Assumption Register
Surcharge, Ponding, and Exceedance-Path Map
Water-Quality and Green-Gray Control Matrix

Day 5: Stormwater Drainage Design Practice

Exercise: Establish Catchments, Rainfall, and Design Criteria
Exercise: Calculate Runoff and Test Hydrologic Assumptions
Exercise: Size Conveyance, Channels, Storage, and Outfalls
Exercise: Review Model Results, Flood Routes, and Drawings
Capstone Exercise: Stormwater Drainage Design Package

Practical Exercises

The course uses suggested activities to connect hydrologic evidence, hydraulic calculations, model review, and design documentation.

Suggested activity: delineate catchments and flow paths, classify surfaces, select rainfall inputs and a design storm, and document criteria and assumptions.
Suggested activity: estimate peak flow and hydrographs, test concentration time and runoff parameters, and record sensitivity conclusions.
Suggested activity: size representative inlets, pipes, culverts, channels, storage, outlet controls, and outfall protection under defined conditions.
Suggested activity: integrate model assumptions, surcharge and flood pathways, water-quality controls, calculations, drawings, comments, and resolutions in a Stormwater Drainage Design Package.

FAQs

Who suits the stormwater drainage study and design course and what does it assume?

It suits engineering teams responsible for drainage studies, design, coordination, or review, and assumes they can use engineering calculations and interpret survey information, site plans, and infrastructure drawings.

How does stormwater drainage study and design differ from flood-risk training?

Stormwater drainage study and design focuses on rainfall-runoff inputs, network conveyance, storage, outfalls, surface exceedance, models, and drawings, while general flood-risk training usually places greater emphasis on hazard assessment, exposure, consequences, and risk management.

How are design storms selected for stormwater drainage?

Design storms are selected from applicable rainfall-frequency information, project criteria, catchment response, duration, temporal pattern, receiving conditions, uncertainty, and the consequences of capacity exceedance.

Why are detention and overflow routes both needed in stormwater design?

Detention controls the timing and rate of discharge within defined criteria, while overflow routes provide a planned surface pathway when inflow exceeds storage or conveyance capacity.

What belongs in a Stormwater Drainage Design Package?

The package records catchments, rainfall basis, design storms, runoff parameters, calculations, network and channel sizing, storage routing, outfall conditions, model assumptions, flood pathways, water-quality controls, drawings, review comments, and resolutions.

Conclusion

Participants take back a Stormwater Drainage Design Package linking hydrologic inputs, hydraulic capacity, storage, outfalls, flood pathways, model assumptions, calculations, and drawings. It changes isolated drainage checks into a traceable design and review sequence. The package supports engineering decisions without replacing project-specific data, professional judgment, field verification, or applicable approval processes.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 56 events

Location	Dates	Duration	Mode	Price
Istanbul	Week 42, 2026 12 – 16 October 2026	5 Days	Onsite	€6,000
Nairobi	Week 42, 2026 18 – 22 October 2026	5 Days	Onsite	€6,000
Muscat	Week 45, 2026 8 – 12 November 2026	5 Days	Onsite	€6,500
Milan	Week 46, 2026 9 – 13 November 2026	5 Days	Onsite	€7,000
Accra	Week 46, 2026 15 – 19 November 2026	5 Days	Onsite	€6,000
Chicago	Week 46, 2026 15 – 19 November 2026	5 Days	Onsite	€16,000
Langkawi	Week 47, 2026 22 – 26 November 2026	5 Days	Onsite	€8,000
Athens	Week 48, 2026 23 – 27 November 2026	5 Days	Onsite	€7,500
Trabzon	Week 48, 2026 29 November – 3 December 2026	5 Days	Onsite	€8,000
Seoul	Week 50, 2026 7 – 11 December 2026	5 Days	Onsite	€12,000
Amman	Week 50, 2026 13 – 17 December 2026	5 Days	Onsite	€6,000
Cape town	Week 53, 2027 3 – 7 January 2027	5 Days	Onsite	€6,000
Zoom	Week 03, 2027 18 – 22 January 2027	5 Days	Online	€3,000
Abu Dhabi	Week 03, 2027 18 – 22 January 2027	5 Days	Onsite	€6,500
Tokyo	Week 04, 2027 25 – 29 January 2027	5 Days	Onsite	€12,000
Singapore	Week 04, 2027 25 – 29 January 2027	5 Days	Onsite	€6,500
San Diego	Week 05, 2027 1 – 5 February 2027	5 Days	Onsite	€16,000
Jakarta	Week 06, 2027 8 – 12 February 2027	5 Days	Onsite	€8,000
New York	Week 06, 2027 8 – 12 February 2027	5 Days	Onsite	€16,000
Doha	Week 06, 2027 14 – 18 February 2027	5 Days	Onsite	€7,000

Frequently asked questions

What does this course cover?

OverviewStormwater Drainage Study and Design Course is a five-day intermediate course for civil and drainage engineers, infrastructure planners, reviewers, consultants, project engineers, and technical-office teams who leave with a Stormwater Drainage Design Package. Participants connect catchment delineation, rainfall data, design storms, runoff estimati…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Stormwater Drainage Study and Design Course