Heavy Oil Production Optimization Training Course

Name: Advanced Heavy Oil Production Optimization Training Course
Availability: InStock

Connect reservoir, well, thermal recovery, surveillance, and surface evidence to improve heavy oil field decisions.

At a glance

Duration: 1 Week
Format: Classroom
Cities: Cape town, Montreux, Lagos, Dubai, Nice, San Diego and more
Next session: 8 – 12 November 2026, Cape town
Average fee: 7,500 €

Home
Our Categories
Advanced Heavy Oil Production Optimization Training Course

Overview

Advanced Heavy Oil Production Optimization Training Course is a one-week advanced course for reservoir, production, thermal recovery, field development, and operations teams who leave with a Heavy Oil Production Optimization File. Participants connect heavy oil reservoir behavior, viscosity and mobility constraints, cold production, thermal recovery, artificial lift, surface handling, and production surveillance to diagnose well and pattern performance. The course turns operating evidence into integrated decisions on rates, steam, fluids, energy intensity, and limits. Agile Leaders Training Center presents heavy oil production optimization practice.

Who Should Attend

Reservoir teams responsible for heavy oil recovery screening, pattern performance, and depletion decisions
Production teams responsible for well deliverability, artificial lift, diagnostics, and intervention priorities
Thermal recovery teams responsible for steam injection, CSS cycles, SAGD performance, and heat management
Field development teams responsible for integrated subsurface, well, and facility decisions
Operations leadership responsible for production targets, operating limits, energy use, and asset coordination

The course assumes participants analyze reservoir, well, facility, or operating data at work, and it leaves out refinery conversion, introductory fluid modeling, standalone lift selection, and general production operations.

Departments and Industries

The course supports departments and industries that develop, operate, monitor, or improve viscous hydrocarbon production systems.

Heavy oil, extra-heavy oil, and oil sands field operations
Reservoir engineering, production technology, and field development departments
Thermal recovery, steam generation, water treatment, and energy management teams
Well operations, artificial lift, flow assurance, and production chemistry functions
Engineering consultancies, technical service companies, and applied energy research groups

Learning Objectives

By the end of this course, participants will be able to:

Analyze viscosity, mobility, reservoir, and operating constraints
Compare cold production and thermal recovery methods
Diagnose well, lift, fluid, and pattern underperformance
Evaluate steam, water, gas, sand, and emulsion controls
Prioritize surveillance and production optimization actions
Build a Heavy Oil Production Optimization File

Course Agenda

Day 1: Define Heavy Oil Production Constraints

Heavy Oil Classification and Viscosity-Temperature Curve
Reservoir Mobility and Deliverability Constraint Map
Fluid, Rock, Sand, and Foamy-Oil Behavior Review
Cold-versus-Thermal Recovery Screening Matrix
Field Production Basis and Operating-Limit Register

Day 2: Optimize Cold Production and Well Delivery

Cold Heavy Oil Production with Sand Performance Model
Horizontal-Well Inflow and Pressure-Loss Diagnostic
Viscous-Fluid Artificial Lift Operating Envelope
Gas Interference and Water Loading Decision Tree
Well Deliverability and Intervention Priority Table

Day 3: Evaluate Thermal Recovery Performance

Cyclic Steam Stimulation Injection-Soak-Production Cycle
Steamflood Pattern Balance and Heat-Loss Review
SAGD Steam-Chamber Growth Interpretation Method
Steam-Oil Ratio and Energy-Intensity Performance Dashboard
Thermal Breakthrough and Conformance Response Matrix

Day 4: Integrate Surveillance and Surface Controls

Well and Pattern Production Surveillance Plan
Rate, Pressure, Temperature, and Fluid Trend Diagnostic
Sand Production and Erosion Control Checklist
Heavy Oil Emulsion and Surface Handling Decision Map
Produced Water, Gas, Diluent, and Heat Integration Sheet

Day 5: Practice Heavy Oil Optimization Decisions

Suggested Exercise: Screen Cold and Thermal Recovery Options
Suggested Exercise: Diagnose a Viscous-Well Production Decline
Suggested Exercise: Evaluate SAGD and CSS Performance Evidence
Suggested Exercise: Prioritize Surface and Surveillance Actions
Capstone Exercise: Complete the Heavy Oil Production Optimization File

Practical Exercises

The course uses suggested activities to convert reservoir-to-surface evidence into bounded production decisions.

Suggested activity: build a constraint map from viscosity, mobility, pressure, temperature, sand, water, gas, and facility evidence.
Suggested activity: compare cold production, CSS, steamflood, and SAGD against reservoir fit, energy intensity, and operating limits.
Suggested activity: diagnose well and pattern trends and assign surveillance, lift, steam, fluid, or surface responses.
Suggested activity: defend an integrated optimization file with priorities, triggers, responsibilities, and follow-up measures.

FAQs

Who suits advanced heavy oil production optimization training, and what does it assume?

Reservoir, production, thermal recovery, field development, and operations professionals suit the course. It assumes experience interpreting field, well, reservoir, facility, or operating evidence and does not teach introductory petroleum engineering.

How does heavy oil production optimization differ from general production operations training?

Heavy oil production optimization addresses viscosity, sand, emulsions, thermal recovery, steam efficiency, and pattern behavior as linked constraints. General production operations training covers broader routine production systems without this heavy-oil decision focus.

How are CSS and SAGD compared in heavy oil production optimization?

CSS is evaluated as a repeated injection, soak, and production cycle, while SAGD is evaluated through paired wells and steam-chamber development. The comparison uses reservoir fit, thermal response, production evidence, steam use, and operating limits.

What evidence supports heavy oil well and pattern optimization?

Rate, pressure, temperature, fluid composition, steam, water, gas, sand, lift behavior, energy intensity, and facility constraints support optimization. Their trends and relationships matter more than a single production-rate observation.

Why does steam-oil ratio matter in thermal heavy oil production?

Steam-oil ratio links injected steam to produced oil and helps teams examine thermal efficiency, water demand, fuel exposure, heat losses, and changing reservoir response. It must be interpreted with operating conditions and production trends.

Conclusion

Participants take back a Heavy Oil Production Optimization File linking reservoir behavior, wells, recovery methods, surveillance, surface controls, energy intensity, and operating limits. It changes separate technical observations into one prioritized field-decision record. Teams can update it as production evidence, thermal response, fluid behavior, and asset constraints change.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-58 of 58 events

Location	Dates	Duration	Mode	Price
Phuket	Week 28, 2027 18 – 22 July 2027	1 Week	Onsite	€8,000
Sharm El-Sheikh	Week 30, 2027 26 – 30 July 2027	1 Week	Onsite	€5,200
Bangkok	Week 30, 2027 1 – 5 August 2027	1 Week	Onsite	€8,000
Manama	Week 31, 2027 8 – 12 August 2027	1 Week	Onsite	€6,500
Addis Ababa	Week 32, 2027 9 – 13 August 2027	1 Week	Onsite	€6,000
Amman	Week 32, 2027 15 – 19 August 2027	1 Week	Onsite	€6,000
Seoul	Week 34, 2027 23 – 27 August 2027	1 Week	Onsite	€12,000
Amsterdam	Week 35, 2027 30 August – 3 September 2027	1 Week	Onsite	€6,500
Kuwait	Week 35, 2027 5 – 9 September 2027	1 Week	Onsite	€7,000
Bali	Week 37, 2027 19 – 23 September 2027	1 Week	Onsite	€6,500
Abu Dhabi	Week 38, 2027 20 – 24 September 2027	1 Week	Onsite	€6,500
Vienna	Week 39, 2027 27 September – 1 October 2027	1 Week	Onsite	€7,500
Singapore	Week 40, 2027 4 – 8 October 2027	1 Week	Onsite	€6,500
London	Week 42, 2027 18 – 22 October 2027	1 Week	Onsite	€6,500
Marbella	Week 42, 2027 24 – 28 October 2027	1 Week	Onsite	€6,500
Casablanca	Week 43, 2027 25 – 29 October 2027	1 Week	Onsite	€6,000
Doha	Week 44, 2027 7 – 11 November 2027	1 Week	Onsite	€7,000
Toronto	Week 44, 2027 7 – 11 November 2027	1 Week	Onsite	€16,000

Frequently asked questions

What does this course cover?

OverviewAdvanced Heavy Oil Production Optimization Training Course is a one-week advanced course for reservoir, production, thermal recovery, field development, and operations teams who leave with a Heavy Oil Production Optimization File. Participants connect heavy oil reservoir behavior, viscosity and mobility constraints, cold production, thermal recove…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Heavy Oil Production Optimization Training Course