Industrial Servo Motors and Motion Control Course

Name: Industrial Servo Motors and Motion Control Training Course
Availability: InStock

Configure feedback, motion profiles, control loops, tuning, commissioning, and diagnostics for precision servo axes.

Industrial Servo Motors and Motion Control Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Munich, Paris, Abu Dhabi, Phuket, Vienna, Dubai and more
Next session: 9 – 13 November 2026, Munich
Average fee: 7,500 €

Home
Our Categories
Industrial Servo Motors and Motion Control Training Course

Overview

Industrial Servo Motors and Motion Control Training Course is a one-week intermediate course for automation, electrical maintenance, controls, and commissioning teams who leave with a Servo Axis Commissioning and Diagnostic Pack. Participants connect industrial servo motor selection, encoder feedback systems, closed-loop motion control, motion profiles, servo axis tuning, controller integration, and servo drive fault diagnosis. The course separates precision positioning applications from general variable-speed motor systems. Agile Leaders Training Center delivers this course on industrial servo motors and motion control.

Who Should Attend

Teams responsible for selecting and commissioning servo motors and drives
Functions responsible for programming and integrating motion-control axes
Groups responsible for encoder, feedback, and positioning-system diagnostics
Maintenance teams responsible for alarms, faults, replacement, and recommissioning
Machine-support functions responsible for motion profiles and production recovery

The course assumes participants can read electrical and control diagrams and work with industrial automation systems, and it leaves out live energized work, vendor certification, and mechanical machine design.

Departments and Industries

The course supports precision-motion work across automated manufacturing and equipment-service environments.

Automation, controls, and electrical maintenance departments
Packaging, converting, printing, and material-handling operations
Robotics, machine building, and assembly-system teams
Food, pharmaceutical, and electronics manufacturing facilities
Commissioning, field service, and technical-support functions

Learning Objectives

By the end of this course, participants will be able to:

Compare servo motor, drive, feedback, and load requirements
Build position, speed, and torque control-loop maps
Use motion-profile and axis-configuration records
Analyze tuning response and mechanical resonance evidence
Apply controller integration and commissioning checks
Diagnose alarms, feedback faults, and motion deviations

Course Agenda

Day 1: Servo Axis Architecture and Selection

Servo Motor, Drive, Controller, and Load Functional Map
Rotary and Linear Servo Application Selection Matrix
Torque, Speed, Inertia, and Duty-Cycle Screening Sheet
Motor, Gearbox, Coupling, and Load Matching Checklist
Power, Feedback, Brake, and Grounding Connection Diagram

Day 2: Feedback and Closed-Loop Control

Encoder, Resolver, and Absolute-Feedback Comparison
Position, Speed, and Torque Loop Block Diagram
Command, Feedback, Following-Error, and Limit Register
Homing, Referencing, and Travel-Limit Method
Signal Scaling, Direction, Polarity, and Resolution Check

Day 3: Motion Profiles and Controller Integration

Position, Velocity, Acceleration, and Jerk Profile Chart
Point-to-Point and Synchronized Motion Selection Guide
Axis Object, Tag, and State-Machine Configuration Record
PLC and Motion-Controller Command Sequence Map
Industrial Communication and Axis-Data Verification Plan

Day 4: Tuning, Commissioning, and Diagnostics

Inertia Estimate and Mechanical-Compliance Review
Autotuning and Manual-Tuning Decision Method
Gain, Filter, Resonance, and Response Trace Analysis
Commissioning Baseline and Acceptance-Test Checklist
Alarm, Fault, Trace, Backup, and Replacement Workflow

Day 5: Servo Motion Practice

Suggested Exercise: Select a Servo Axis for a Defined Load
Suggested Exercise: Configure Feedback and Motion Limits
Suggested Exercise: Build and Evaluate a Motion Profile
Suggested Exercise: Diagnose Following Error and Oscillation
Capstone Exercise: Complete the Servo Axis Commissioning and Diagnostic Pack

Practical Exercises

The course uses suggested activities to connect servo-axis evidence with commissioning and maintenance decisions.

Suggested activity: compare motor, drive, encoder, gearbox, and load combinations for a positioning duty
Suggested activity: map position, speed, and torque loops and identify relevant traces
Suggested activity: adjust a motion profile and evaluate acceleration, jerk, settling, and following error
Suggested activity: isolate a fault using alarm history, feedback evidence, wiring checks, and response traces

FAQs

Who suits industrial servo motors and motion control training, and what does it assume?

Automation, controls, electrical maintenance, commissioning, and machine-support personnel suit the course. It assumes diagram-reading ability and industrial automation experience while leaving live energized work, vendor certification, and detailed machine design outside scope.

How does servo motion control training differ from AC motor and VFD maintenance?

Servo motion control training focuses on closed-loop position, speed, and torque regulation, precision feedback, motion profiles, axis synchronization, and tuning. AC motor and VFD maintenance concentrates on variable-speed motor operation, electrical condition, protection, and drive faults.

What information is needed for industrial servo motor selection?

Selection uses required torque, speed, travel, precision, duty cycle, inertia, acceleration, load mechanics, environment, brake needs, feedback type, controller compatibility, and available power. The motor, drive, gearbox, coupling, and load must be evaluated as one axis.

How is a servo axis tuned without causing instability?

Tuning starts from verified mechanics, correct feedback, load inertia, safe limits, and a controlled test profile. Response traces then guide gain, filter, feedforward, and profile adjustments while checking oscillation, overshoot, settling, resonance, and following error.

What causes servo drive alarms and positioning errors?

Common causes include feedback loss, wiring or grounding faults, incorrect scaling or polarity, excessive load or acceleration, poor tuning, mechanical binding, resonance, travel-limit activation, communication loss, parameter mismatch, and damaged components.

Conclusion

Participants take back a Servo Axis Commissioning and Diagnostic Pack containing selection evidence, loop maps, axis records, motion profiles, tuning traces, commissioning checks, and fault-isolation steps. It creates a repeatable basis for startup and recovery decisions. The pack supports clearer coordination between automation, maintenance, controls, and machine-service teams.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-58 of 58 events

Location	Dates	Duration	Mode	Price
Madrid	Week 26, 2027 28 June – 2 July 2027	1 Week	Onsite	€6,500
Montreux	Week 27, 2027 5 – 9 July 2027	1 Week	Onsite	€8,000
Jakarta	Week 30, 2027 26 – 30 July 2027	1 Week	Onsite	€8,000
Zoom	Week 31, 2027 2 – 6 August 2027	1 Week	Online	€3,000
Lisbon	Week 31, 2027 2 – 6 August 2027	1 Week	Onsite	€6,500
Johannesburg	Week 31, 2027 8 – 12 August 2027	1 Week	Onsite	€6,000
Baku	Week 32, 2027 9 – 13 August 2027	1 Week	Onsite	€8,000
Doha	Week 33, 2027 22 – 26 August 2027	1 Week	Onsite	€7,000
Marbella	Week 33, 2027 22 – 26 August 2027	1 Week	Onsite	€6,500
Lagos	Week 36, 2027 12 – 16 September 2027	1 Week	Onsite	€6,000
London	Week 39, 2027 27 September – 1 October 2027	1 Week	Onsite	€6,500
San Diego	Week 41, 2027 11 – 15 October 2027	1 Week	Onsite	€16,000
Tbilisi	Week 42, 2027 18 – 22 October 2027	1 Week	Onsite	€5,700
Berlin	Week 42, 2027 18 – 22 October 2027	1 Week	Onsite	€6,500
Sharm El-Sheikh	Week 43, 2027 25 – 29 October 2027	1 Week	Onsite	€5,200
Accra	Week 43, 2027 31 October – 4 November 2027	1 Week	Onsite	€6,000
Chicago	Week 44, 2027 7 – 11 November 2027	1 Week	Onsite	€16,000
Casablanca	Week 45, 2027 8 – 12 November 2027	1 Week	Onsite	€6,000

Frequently asked questions

What does this course cover?

OverviewIndustrial Servo Motors and Motion Control Training Course is a one-week intermediate course for automation, electrical maintenance, controls, and commissioning teams who leave with a Servo Axis Commissioning and Diagnostic Pack. Participants connect industrial servo motor selection, encoder feedback systems, closed-loop motion control, motion pro…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Industrial Servo Motors and Motion Control Course