Liquid Petroleum Pipeline Engineering Course

Name: Liquid Petroleum Pipeline Engineering Training Course
Availability: InStock

Connect pipeline hydraulics, mechanical design, pump-station interfaces, multiproduct operations, and assurance in one engineering basis.

Liquid Petroleum Pipeline Engineering Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Muscat, Baku, Istanbul, Paris, Phuket, Bangkok and more
Next session: 8 – 12 November 2026, Muscat
Average fee: 7,500 €

Home
Our Categories
Liquid Petroleum Pipeline Engineering Training Course

Download Brochure (PDF) Print PDF

Overview

Liquid Petroleum Pipeline Engineering Training Course is a one-week course for pipeline, hydraulic, project, operations, and integrity professionals who leave with a Liquid Petroleum Pipeline Design Basis and Assurance File. Participants connect fluid properties, pipeline hydraulics, diameter and pressure decisions, pump stations, mechanical design, batching, operability, and integrity-by-design. The course resolves gaps between calculations, interfaces, assumptions, and review evidence. Agile Leaders Training Center presents liquid petroleum pipeline engineering.

Who Should Attend

Pipeline engineering functions responsible for design basis and system configuration
Hydraulic analysis functions responsible for flow, pressure, diameter, and pump cases
Project engineering functions responsible for route, mechanical, station, and package interfaces
Operations functions responsible for batching, metering, linefill, and operating envelopes
Integrity functions responsible for design threats, corrosion provisions, and inspection access
Technical assurance functions responsible for calculations, deliverables, and multidisciplinary reviews

The course assumes participants already use engineering calculations, process data, pipeline terminology, or design deliverables, and it leaves out detailed pump machinery design, specialist surge modeling, construction supervision, digital-twin development, and in-line inspection execution.

Departments and Industries

The course supports departments and industries that develop, operate, review, or assure liquid petroleum pipeline systems.

Crude oil gathering and transmission
Refined-product and multiproduct pipeline networks
Petroleum refining, storage, and distribution
Engineering, procurement, and construction organizations
Pipeline operations, integrity, and maintenance
Technical consulting and design assurance

Learning Objectives

By the end of this course, participants will be able to:

Build a traceable liquid pipeline design basis
Analyze steady-state hydraulic and pump-station cases
Evaluate diameter, pressure, material, and wall-thickness decisions
Apply batching, metering, isolation, and operability provisions
Diagnose surge, contamination, corrosion, and interface risks
Build an integrity-by-design and assurance record

Course Agenda

Day 1: Establish the Design Basis

Liquid Petroleum Pipeline Boundary and Functional Map
Crude Oil and Refined-Product Property Input Sheet
Normal, Peak, Minimum, and Contingency Flow Case Register
ASME B31.4 Applicability and Requirement Matrix
Design Pressure, Temperature, Life, and Assurance Basis

Day 2: Analyze Pipeline Hydraulics

Steady-State Flow and Pressure Profile Method
Friction Factor, Elevation, and Pressure-Loss Calculation Sheet
Diameter, Velocity, and Hydraulic Capacity Comparison
Pump System Curve and Operating-Point Assessment
Station Spacing, Suction Margin, and Pressure Constraint Review

Day 3: Define Mechanical and Route Decisions

Route Corridor, Crossing, Geohazard, and Access Register
API Spec 5L Line-Pipe Grade and Product Selection Matrix
Wall Thickness, Design Factor, and Corrosion Allowance Check
Valve Spacing, Isolation, Drain, Vent, and Pigging Provision Map
API Standard 1104 Welding and Joining Interface Checklist

Day 4: Integrate Operations and Integrity

Pump Station, Metering, Control, and Utility Interface Diagram
Batch Sequence, Interface Volume, and Contamination Control Plan
Linefill, Start-Up, Shutdown, and Operating-Envelope Register
Surge Scenario Screening and Protection Requirement Sheet
Integrity Threat, Corrosion Control, and Inspection Access Matrix

Day 5: Practice Pipeline Design Assurance

Suggested Exercise: Reconcile Fluid Cases with Hydraulic Capacity
Suggested Exercise: Select Diameter, Pipe Grade, and Wall Thickness
Suggested Exercise: Resolve Pump, Metering, and Batch Interfaces
Suggested Exercise: Review Surge, Operability, and Integrity Provisions
Capstone Exercise: Complete the Liquid Petroleum Pipeline Design Basis and Assurance File

Practical Exercises

The course uses suggested activities to convert pipeline assumptions, calculations, interfaces, and risks into traceable engineering decisions.

Suggested activity: build normal, peak, minimum, and contingency cases from crude-oil and product-property data.
Suggested activity: compare candidate diameters and pump arrangements against flow, velocity, pressure, and station constraints.
Suggested activity: document route, material, wall-thickness, isolation, metering, and batching decisions.
Suggested activity: conduct a multidisciplinary review of operability, surge screening, integrity threats, and assurance actions.

FAQs

Who suits liquid petroleum pipeline engineering training, and what does it assume?

Liquid petroleum pipeline engineering training suits pipeline, hydraulic, project, operations, integrity, and technical-assurance functions. It assumes familiarity with engineering calculations, fluid data, pipeline terminology, operating records, or design documents.

How does liquid petroleum pipeline engineering differ from gas transmission design training?

Liquid petroleum pipeline engineering addresses liquid properties, steady-state pressure loss, pumps, multiproduct batching, interfaces, contamination, and surge screening. Gas transmission design addresses compressible flow, gas properties, compressor stations, and gas-network behavior.

How is pipeline diameter selected for crude oil and petroleum products?

Pipeline diameter is selected by comparing required flow, fluid properties, velocity, pressure loss, elevation, available pump head, station constraints, operating flexibility, surge exposure, mechanical requirements, and lifecycle considerations within a documented design basis.

How are pump stations integrated into liquid petroleum pipeline hydraulics?

Pump stations are integrated by matching the pipeline system curve with pump operating ranges, suction conditions, discharge limits, station spacing, control philosophy, minimum-flow needs, power availability, and normal and contingency operating cases.

How does multiproduct pipeline engineering control batch interfaces?

Multiproduct pipeline engineering controls interfaces through product sequencing, compatible batch planning, flow stability, interface tracking, meter and density evidence, contamination limits, routing decisions, transmix handling, and coordinated terminal receipt arrangements.

Conclusion

Participants take back a Liquid Petroleum Pipeline Design Basis and Assurance File linking fluid cases, hydraulics, route constraints, materials, stations, operations, integrity provisions, and review actions. The file changes disconnected calculations into one traceable engineering basis. It supports clearer interface decisions, documented assumptions, operability checks, and multidisciplinary design assurance.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 41-58 of 58 events

Location	Dates	Duration	Mode	Price
Lagos	Week 29, 2027 25 – 29 July 2027	1 Week	Onsite	€6,000
Abu Dhabi	Week 30, 2027 26 – 30 July 2027	1 Week	Onsite	€6,500
Chicago	Week 30, 2027 1 – 5 August 2027	1 Week	Onsite	€16,000
Vienna	Week 32, 2027 9 – 13 August 2027	1 Week	Onsite	€7,500
Prague	Week 33, 2027 16 – 20 August 2027	1 Week	Onsite	€7,500
Cape town	Week 33, 2027 22 – 26 August 2027	1 Week	Onsite	€6,000
Manama	Week 34, 2027 29 August – 2 September 2027	1 Week	Onsite	€6,500
Amman	Week 35, 2027 5 – 9 September 2027	1 Week	Onsite	€6,000
London	Week 37, 2027 13 – 17 September 2027	1 Week	Onsite	€6,500
Zoom	Week 38, 2027 20 – 24 September 2027	1 Week	Online	€3,000
New York	Week 39, 2027 27 September – 1 October 2027	1 Week	Onsite	€16,000
Kuwait	Week 39, 2027 3 – 7 October 2027	1 Week	Onsite	€7,000
Jakarta	Week 41, 2027 11 – 15 October 2027	1 Week	Onsite	€8,000
Addis Ababa	Week 41, 2027 11 – 15 October 2027	1 Week	Onsite	€6,000
Tbilisi	Week 42, 2027 18 – 22 October 2027	1 Week	Onsite	€5,700
Sharm El-Sheikh	Week 43, 2027 25 – 29 October 2027	1 Week	Onsite	€5,200
Zanzibar	Week 43, 2027 31 October – 4 November 2027	1 Week	Onsite	€6,000
Kuala Lumpur	Week 45, 2027 8 – 12 November 2027	1 Week	Onsite	€6,500

Frequently asked questions

What does this course cover?

OverviewLiquid Petroleum Pipeline Engineering Training Course is a one-week course for pipeline, hydraulic, project, operations, and integrity professionals who leave with a Liquid Petroleum Pipeline Design Basis and Assurance File. Participants connect fluid properties, pipeline hydraulics, diameter and pressure decisions, pump stations, mechanical desig…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Liquid Petroleum Pipeline Engineering Course