Offshore and Marine Drilling Operations Course

Name: Advanced Offshore and Marine Drilling Operations Training Course
Availability: InStock

Select offshore drilling units, integrate marine and subsea systems, and control station-keeping and operating limits.

Offshore and Marine Drilling Operations Course

At a glance

Duration: 1 Week
Format: Classroom
Cities: Paris, Geneva, Tashkent, Addis Ababa, Nairobi, Lagos and more
Next session: 9 – 13 November 2026, Paris
Average fee: 7,500 €

Home
Our Categories
Advanced Offshore and Marine Drilling Operations Training Course

Overview

Advanced Offshore and Marine Drilling Operations Training Course is a one-week course for offshore drilling, rig, subsea, marine-operations, wellsite, and assurance teams who leave with a Marine Drilling Operations Assurance File. Participants connect mobile offshore drilling unit selection, drilling and marine systems, station keeping, riser behavior, subsea well-control equipment, weather limits, logistics, and emergency interfaces. The course uses system maps, calculation sheets, operating envelopes, readiness checks, and decision records. Agile Leaders Training Center presents offshore and marine drilling operations.

Who Should Attend

Offshore drilling functions responsible for well execution, rig interfaces, and operating limits
Rig-management functions responsible for unit capability, readiness, and marine coordination
Subsea functions responsible for wellheads, risers, blowout preventers, and control systems
Marine-operations functions responsible for station keeping, ballast, weather, and vessel interfaces
Wellsite-supervision functions responsible for permits, simultaneous operations, deviations, and response
Technical-assurance functions responsible for selection reviews, barrier evidence, and acceptance records

The course assumes participants interpret drilling programs, equipment schematics, metocean data, and operational risk controls at work, and it leaves out introductory drilling, detailed casing, fluid, and BHA design, accredited well-control instruction, rig inspection certification, and vessel-handling competence.

Departments and Industries

The course supports departments and industries that select, operate, or assure offshore drilling units and marine interfaces.

Offshore oil and gas exploration and well construction
Geothermal and carbon-storage offshore well development
Drilling contractors and mobile offshore drilling unit operators
Subsea equipment, marine engineering, and offshore logistics services
Technical assurance, well integrity, and operational risk functions

Learning Objectives

By the end of this course, participants will be able to:

Compare jack-up, semisubmersible, and drillship operating capabilities
Build drilling, marine, power, and utility system-interface maps
Analyze mooring and dynamic-positioning operating envelopes
Evaluate riser, heave-compensation, and subsea well-control limits
Use metocean, logistics, readiness, and simultaneous-operations controls
Diagnose deviations and prioritize disconnect or recovery actions

Course Agenda

Day 1: Select the Offshore Drilling Unit

Well, Water-Depth, Metocean, and Campaign Requirement Register
Jack-Up, Semisubmersible, and Drillship Capability Matrix
Seabed, Air-Gap, Variable-Load, and Deck-Space Screening Sheet
IMO MODU Code Unit, Stability, and Marine-Safety Review Map
Unit Selection, Constraint, and Technical-Assurance Decision Record

Day 2: Map Rig and Marine Systems

Hoisting, Rotary, Circulation, and Pipe-Handling System Map
Power Generation, Distribution, Redundancy, and Blackout-Recovery Matrix
Ballast, Bilge, Deck, Crane, and Marine-Utility Interface Register
Mud, Cement, Bulk, Fuel, Water, and Waste Logistics Flow Sheet
Drilling Control, Alarm, Communication, and Permit Interface Diagram

Day 3: Control Station Keeping and Riser Behavior

IMCA M103 Dynamic-Positioning Capability and Operating Guidance Review
Mooring Pattern, Anchor, Line-Tension, and Offset Assessment
Wind, Wave, Current, Heading, and Watch-Circle Operating Envelope
API Spec 16F Marine Drilling Riser Configuration and Load Map
Riser Tension, Stroke, Heave-Compensation, and Flex-Joint Limit Sheet

Day 4: Integrate Subsea and Offshore Execution

Subsea Wellhead, Conductor, and Landing-Sequence Readiness Plan
API Spec 16A Subsea BOP Stack and Drill-Through Equipment Matrix
API Spec 16D BOP Control, Accumulator, and Response-Function Check
Choke, Kill, Diverter, Riser-Margin, and Emergency-Disconnect Logic
Weather Window, Supply Vessel, Helicopter, SIMOPS, and Contingency Board

Day 5: Practice Marine Drilling Decisions

Suggested Exercise: Select a MODU for a Metocean and Well Scenario
Suggested Exercise: Close a DP, Mooring, and Watch-Circle Envelope
Suggested Exercise: Check Riser, Heave, and Subsea BOP Interfaces
Suggested Exercise: Diagnose a Weather, Power, or Position-Loss Deviation
Capstone Exercise: Complete the Marine Drilling Operations Assurance File

Practical Exercises

The course uses suggested activities to turn unit, marine, subsea, and operational evidence into traceable offshore drilling decisions.

Suggested activity: compare unit types against water depth, seabed, metocean, payload, deck, well, schedule, and logistics constraints.
Suggested activity: map drilling, power, ballast, marine utility, control, and communication dependencies and identify single-interface vulnerabilities.
Suggested activity: calculate station-keeping, riser, tensioner, heave, offset, weather, and disconnect operating limits.
Suggested activity: reconcile alarms, position, power, weather, well status, and vessel movements to rank continuation, suspension, or disconnect actions.

FAQs

Who suits offshore and marine drilling operations training, and what does it assume?

Offshore and marine drilling operations training suits drilling engineers, rig leaders, subsea and marine engineers, wellsite supervisors, logistics teams, and assurance reviewers. It assumes working ability with drilling programs, system schematics, metocean data, and operational risk controls.

How does marine drilling operations training differ from drilling-rig inspection training?

Marine drilling operations training integrates unit selection, system interfaces, station keeping, riser behavior, subsea well-control equipment, weather, logistics, and operating decisions. Rig inspection training centers on equipment condition, inspection methods, defect recognition, and acceptance evidence.

How is a mobile offshore drilling unit selected?

Mobile offshore drilling unit selection compares water depth, seabed, metocean conditions, well design, payload, deck space, variable load, station keeping, riser needs, logistics, schedule, emergency capability, and assurance requirements.

What defines a marine drilling operating envelope?

A marine drilling operating envelope combines wind, wave, current, heading, position offset, mooring or dynamic-positioning capability, riser angle and stroke, tensioner limits, power redundancy, vessel activity, and well status.

When should an offshore drilling team prepare to disconnect?

Disconnect readiness follows defined position, power, weather, riser, well-control, equipment, and response-time triggers. Teams verify barriers, control functions, sequence logic, communications, vessel clearance, recovery conditions, and decision authority before limits are exceeded.

Conclusion

Participants take back a Marine Drilling Operations Assurance File linking unit selection, system interfaces, station keeping, riser limits, subsea controls, metocean criteria, logistics, readiness, and response decisions. It changes separate technical and marine records into one traceable operating basis. The file supports unit selection, execution readiness, deviation control, and post-operation learning.

credits: 5 credit per day

Course Mode: full-time

Provider: Agile Leaders Training Center

Download Brochure (PDF) Print PDF

Showing 1-20 of 58 events

Location	Dates	Duration	Mode	Price
Paris	Week 46, 2026 9 – 13 November 2026	1 Week	Onsite	€6,500
Geneva	Week 46, 2026 15 – 19 November 2026	1 Week	Onsite	€8,000
Tashkent	Week 46, 2026 15 – 19 November 2026	1 Week	Onsite	€8,000
Addis Ababa	Week 48, 2026 23 – 27 November 2026	1 Week	Onsite	€6,000
Nairobi	Week 48, 2026 29 November – 3 December 2026	1 Week	Onsite	€6,000
Lagos	Week 48, 2026 29 November – 3 December 2026	1 Week	Onsite	€6,000
Jakarta	Week 51, 2026 14 – 18 December 2026	1 Week	Onsite	€8,000
Chicago	Week 53, 2027 3 – 7 January 2027	1 Week	Onsite	€16,000
Vienna	Week 02, 2027 11 – 15 January 2027	1 Week	Onsite	€7,500
Rome	Week 04, 2027 25 – 29 January 2027	1 Week	Onsite	€6,500
London	Week 07, 2027 15 – 19 February 2027	1 Week	Onsite	€6,500
Munich	Week 07, 2027 15 – 19 February 2027	1 Week	Onsite	€6,500
Accra	Week 07, 2027 21 – 25 February 2027	1 Week	Onsite	€6,000
Singapore	Week 08, 2027 22 – 26 February 2027	1 Week	Onsite	€6,500
Johannesburg	Week 09, 2027 7 – 11 March 2027	1 Week	Onsite	€6,000
Milan	Week 11, 2027 15 – 19 March 2027	1 Week	Onsite	€7,000
Abu Dhabi	Week 11, 2027 15 – 19 March 2027	1 Week	Onsite	€6,500
Manama	Week 13, 2027 4 – 8 April 2027	1 Week	Onsite	€6,500
Nice	Week 14, 2027 5 – 9 April 2027	1 Week	Onsite	€8,000
Baku	Week 16, 2027 19 – 23 April 2027	1 Week	Onsite	€8,000

Frequently asked questions

What does this course cover?

OverviewAdvanced Offshore and Marine Drilling Operations Training Course is a one-week course for offshore drilling, rig, subsea, marine-operations, wellsite, and assurance teams who leave with a Marine Drilling Operations Assurance File. Participants connect mobile offshore drilling unit selection, drilling and marine systems, station keeping, riser beha…

Are training dates available?

Yes. Available dates and destinations are listed in the course dates section on this page.

How can I register?

Choose an available date on this page and complete the registration form, or send a programme enquiry.

Can I download the course brochure?

Yes. Use the brochure download link provided on this page.

Offshore and Marine Drilling Operations Course